北京一号线 现地 信号重开(进路锁闭情况) 区故解 操作代码调整

src/jmapNew/theme/beijing_01/menus/menuSection.vue

@@ -51,31 +51,31 @@ export default {
             menu: [],
             menuNormal: {
                 Local: [
-                    {
+                    // {
-                        label: '区段故障解锁',
+                    //     label: '区段故障解锁',
-                        handler: this.fault,
+                    //     handler: this.faultUnlock,
-                        cmdType: CMD.Section.CMD_SECTION_FAULT_UNLOCK
+                    //     cmdType: CMD.Section.CMD_SECTION_FAULT_UNLOCK
-                    },
+                    // },
-                    {
+                    // {
-                        label: '区段激活',
+                    //     label: '区段激活',
-                        handler: this.active,
+                    //     handler: this.active,
-                        cmdType: CMD.Section.CMD_SECTION_ACTIVE
+                    //     cmdType: CMD.Section.CMD_SECTION_ACTIVE
-                    },
+                    // },
-                    {
+                    // {
-                        label: '区段切除',
+                    //     label: '区段切除',
-                        handler: this.split,
+                    //     handler: this.split,
-                        cmdType: CMD.Section.CMD_SECTION_CUT_OFF
+                    //     cmdType: CMD.Section.CMD_SECTION_CUT_OFF
-                    },
+                    // },
-                    {
+                    // {
-                        label: '区段计轴预复位',
+                    //     label: '区段计轴预复位',
-                        handler: this.axlePreReset,
+                    //     handler: this.axlePreReset,
-                        cmdType: CMD.Section.CMD_SECTION_AXIS_PRE_RESET
+                    //     cmdType: CMD.Section.CMD_SECTION_AXIS_PRE_RESET
-                    },
+                    // },
-                    {
+                    // {
-                        label: '区段设置限速',
+                    //     label: '区段设置限速',
-                        handler: this.setSpeed,
+                    //     handler: this.setSpeed,
-                        cmdType: CMD.Section.CMD_SECTION_SET_LIMIT_SPEED
+                    //     cmdType: CMD.Section.CMD_SECTION_SET_LIMIT_SPEED
-                    }
+                    // }
                 ],
                 Center: [
                     {
@@ -172,14 +172,19 @@ export default {
         },
         operationHandler(buttonOperation, selectType) {
             switch (buttonOperation) {
-            case OperationEvent.Signal.guide.button.operation: {
+            case OperationEvent.Section.fault.menu.operation: {
                 // 区故解
+                if (selectType.fault) {
+                    this.faultUnlock(selectType);
+                } else {
+                    this.$refs.noticeInfo.doShow({}, `该区段[${selectType.name}(${selectType.code})]没有故障`);
+                }
                 break;
             }
-            case OperationEvent.Signal.guide.button.operation: {
+            // case OperationEvent: {
-                // 计轴复位
+            //     // 计轴复位
-                break;
+            //     break;
-            }
+            // }
             }
         },
         // // 设置计轴失效
@@ -205,20 +210,19 @@ export default {
         //     });
         // },
         // 故障解锁
-        fault() {
+        faultUnlock(selectType) {
             const operate = {
                 start: true,
-                code: this.selected.code,
                 operation: OperationEvent.Section.fault.menu.operation,
                 param: {
-                    sectionCode: `${this.selected.code}`
+                    sectionCode: selectType.code
-                }
+                },
+                cmdType: CMD.Section.CMD_SECTION_FAULT_UNLOCK
             };
-
             this.$store.dispatch('training/nextNew', operate).then(({ valid }) => {
                 if (valid) {
                     this.$store.dispatch('menuOperation/handleBreakFlag', { break: true });
-                    this.$refs.sectionCmdControl.doShow(operate, this.selected);
+                    // this.$refs.sectionCmdControl.doShow(operate, this.selected);
                 }
             });
         },
@@ -299,19 +303,6 @@ export default {
         },
         // 设置速度
         setSpeed() {
-            // let operate = {
-            //     start: true,
-            //     code: this.selected.code,
-            //     type: MapDeviceType.Section.type,
-            //     label: MapDeviceType.Section.label,
-            //     operation: OperationEvent.Section.setLimitSpeed.menu.operation
-            // };
-            // this.$store.dispatch('training/next', operate).then(({ valid }) => {
-            //     if (valid) {
-            //         this.$store.dispatch('menuOperation/handleBreakFlag', { break: true });
-            //         this.$refs.speedCmdControl.doShow(operate, this.selected);
-            //     }
-            // });
             const operate = {
                 start: true,
                 code: this.selected.code,

src/jmapNew/theme/beijing_01/menus/menuSignal.vue

@@ -218,6 +218,13 @@ export default {
             }
             case OperationEvent.Signal.reopenSignal.button.operation: {
                 // 信号重开
+                if (selectType.greenOpen) {
+                    this.$refs.noticeInfo.doShow({}, `信号机[${selectType.name}(${selectType.code})]已开启，无需重开信号机`);
+                } else {
+                    // 开放进路信号机因故关闭
+                    this.reopenSignalByRoute(selectType);
+                    // 开放非进路信号机因故关闭
+                }
                 break;
             }
             case OperationEvent.Signal.guide.button.operation: {
@@ -335,6 +342,27 @@ export default {
                 }
             });
         },
+
+        // 现地信号重开操作
+        reopenSignalByRoute(selectType) {
+            const operate = {
+                start: true,
+                code: this.selected.code,
+                operation: OperationEvent.Signal.reopenSignal.menu.operation,
+                param: {
+                    signalCode: selectType.code
+                },
+                cmdType: CMD.Signal.CMD_SIGNAL_REOPEN_SIGNAL
+            };
+            this.$store.dispatch('training/nextNew', operate).then(({ valid }) => {
+                if (valid) {
+                    this.$store.dispatch('menuOperation/handleBreakFlag', { break: true });
+                }
+            }).catch((error) => {
+                this.$refs.noticeInfo.doShow(operate, error.message);
+            });
+        },
+
         // 信号重开
         reopenSignal() {
             const operate = {

src/jmapNew/theme/beijing_01/menus/menuSwitch.vue

@@ -306,42 +306,25 @@ export default {
                 }
             });
         },
-        // 道岔故障解锁
-        fault() {
-            const operate = {
-                start: true,
-                code: this.selected.code,
-                operation: OperationEvent.Switch.fault.menu.operation,
-                param: {
-                    switchCode: `${this.selected.code}`
-                }
-            };
-            this.$store.dispatch('training/nextNew', operate).then(({ valid }) => {
-                if (valid) {
-                    this.$store.dispatch('menuOperation/handleBreakFlag', { break: true });
-                    this.$refs.switchCmdControl.doShow(operate, this.selected);
-                }
-            });
-        },
         // 道岔取消速度
-        cancelSpeed() {
+        // cancelSpeed() {
-            const operate = {
+        //     const operate = {
-                start: true,
+        //         start: true,
-                send: true,
+        //         send: true,
-                code: this.selected.code,
+        //         code: this.selected.code,
-                operation: OperationEvent.Switch.cancelSpeed.menu.operation,
+        //         operation: OperationEvent.Switch.cancelSpeed.menu.operation,
-                param: {
+        //         param: {
-                    switchCode: `${this.selected.code}`
+        //             switchCode: `${this.selected.code}`
-                }
+        //         }
-            };
+        //     };
-            this.$store.dispatch('training/nextNew', operate).then(({ valid, response }) => {
+        //     this.$store.dispatch('training/nextNew', operate).then(({ valid, response }) => {
-                if (valid) {
+        //         if (valid) {
-                    const tempData = response.data;
+        //             const tempData = response.data;
-                    this.$store.dispatch('menuOperation/handleBreakFlag', { break: true });
+        //             this.$store.dispatch('menuOperation/handleBreakFlag', { break: true });
-                    this.$refs.speedCmdControl.doShow(operate, this.selected, tempData);
+        //             this.$refs.speedCmdControl.doShow(operate, this.selected, tempData);
-                }
+        //         }
-            });
+        //     });
-        },
+        // },
 
         // 区段切除
         split() {