rts-sim-module/repository/iscs_pscada_yc.go

package repository

import "joylink.club/rtsssimulation/repository/model/proto"

//电力监控系统车站一次图中相关设备模型

// Pipe 管线模型
type Pipe struct {
	Identity
	Code  string
	Type  proto.Pipe_Type
	PortA DevicePort //管线的A端连接的设备
	PortB DevicePort //管线的B端连接的设备
}

func NewPipe(id string, code string, pipeType proto.Pipe_Type) *Pipe {
	return &Pipe{Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_Pipe}, Code: code, Type: pipeType}
}
func (p *Pipe) PortNum() int {
	return 2
}

// PipePort 管线端口
//
// implement DevicePort
type PipePort struct {
	port proto.Port
	pipe *Pipe
}

func (p *PipePort) Port() proto.Port {
	return p.port
}
func (p *PipePort) Device() PortedDevice {
	return p.pipe
}

///////////////////////////////////////////////////

// PipeFitting 管件模型
type PipeFitting struct {
	Identity
	Code     string
	portsSum int8      //管件端口数
	PortA    *PipePort //管件A端口连接的管线
	PortB    *PipePort //管件B端口连接的管线
	PortC    *PipePort //管件C端口连接的管线
	PortD    *PipePort //管件D端口连接的管线
}

func NewPipeFitting(id string, code string, portsSum int8) *PipeFitting {
	return &PipeFitting{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_PipeFitting},
		Code:     code,
		portsSum: portsSum,
	}
}
func (p *PipeFitting) PortNum() int {
	return int(p.portsSum)
}
func (p *PipeFitting) Ports() []*PipePort {
	var ports []*PipePort
	if p.PortA != nil {
		ports = append(ports, p.PortA)
	}
	if p.PortB != nil {
		ports = append(ports, p.PortB)
	}
	if p.PortC != nil {
		ports = append(ports, p.PortC)
	}
	if p.PortD != nil {
		ports = append(ports, p.PortD)
	}
	return ports
}

// PipeFittingPort 管件端口
//
// implement DevicePort
type PipeFittingPort struct {
	port        proto.Port
	pipeFitting *PipeFitting
}

func (p *PipeFittingPort) Port() proto.Port {
	return p.port
}
func (p *PipeFittingPort) Device() PortedDevice {
	return p.pipeFitting
}

/////////////////////////////////////////////////////////////////////////////

// CircuitBreaker 断路器模型
type CircuitBreaker struct {
	Identity
	Code  string
	PortA *PipePort //断路器A端口连接的管线
	PortB *PipePort //断路器B端口连接的管线
}

func NewCircuitBreaker(id string, code string) *CircuitBreaker {
	return &CircuitBreaker{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_CircuitBreaker},
		Code:     code,
	}
}
func (p *CircuitBreaker) PortNum() int {
	return 2
}

// CircuitBreakerPort 断路器端口
//
// implement DevicePort
type CircuitBreakerPort struct {
	port    proto.Port
	breaker *CircuitBreaker
}

func (p *CircuitBreakerPort) Port() proto.Port {
	return p.port
}
func (p *CircuitBreakerPort) Device() PortedDevice {
	return p.breaker
}

//////////////////////////////////////////////////////////

// ThreePositionSwitch 三工位开关模型
// 有三个连接端口，公共连接点A,隔离开关连接点B,接地开关连接点C
type ThreePositionSwitch struct {
	Identity
	Code  string
	PortA *PipePort //三工位开关A端口连接的管线
	PortB *PipePort //三工位开关B端口连接的管线
	PortC *PipePort //三工位开关C端口连接的管线
}

func NewThreePositionSwitch(id string, code string) *ThreePositionSwitch {
	return &ThreePositionSwitch{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_ThreePositionSwitch},
		Code:     code,
	}
}
func (p *ThreePositionSwitch) PortNum() int {
	return 3
}

// ThreePositionSwitchPort 三工位开关端口
//
// implement DevicePort
type ThreePositionSwitchPort struct {
	port    proto.Port
	breaker *ThreePositionSwitch
}

func (p *ThreePositionSwitchPort) Port() proto.Port {
	return p.port
}
func (p *ThreePositionSwitchPort) Device() PortedDevice {
	return p.breaker
}

////////////////////////////////////////////////////////

// HandcartSwitch 手车模型
type HandcartSwitch struct {
	Identity
	Code  string
	PortA *PipePort //手车A端口连接的管线
	PortB *PipePort //手车B端口连接的管线
}

func NewHandcartSwitch(id string, code string) *HandcartSwitch {
	return &HandcartSwitch{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_HandcartSwitch},
		Code:     code,
	}
}
func (p *HandcartSwitch) PortNum() int {
	return 2
}

// HandcartSwitchPort 手车端口
//
// implement DevicePort
type HandcartSwitchPort struct {
	port    proto.Port
	breaker *HandcartSwitch
}

func (p *HandcartSwitchPort) Port() proto.Port {
	return p.port
}
func (p *HandcartSwitchPort) Device() PortedDevice {
	return p.breaker
}

////////////////////////////////////////////

// Rectifier 整流器模型
//
// PSCADA中整流器有两个交流输入端分别为A和B;直流输出端口有两个分别为直流正极端口C和直流负极端口D
type Rectifier struct {
	Identity
	Code  string
	PortA *PipePort //整流器A端口连接的管线
	PortB *PipePort //整流器B端口连接的管线
	PortC *PipePort //整流器C端口连接的管线
	PortD *PipePort //整流器D端口连接的管线
}

func NewRectifier(id string, code string) *Rectifier {
	return &Rectifier{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_Rectifier},
		Code:     code,
	}
}
func (p *Rectifier) PortNum() int {
	return 4
}

// RectifierPort 整流器端口
//
// implement DevicePort
type RectifierPort struct {
	port      proto.Port
	rectifier *Rectifier
}

func (p *RectifierPort) Port() proto.Port {
	return p.port
}
func (p *RectifierPort) Device() PortedDevice {
	return p.rectifier
}

///////////////////////////////////////////////////////

// Disconnector 隔离开关模型
type Disconnector struct {
	Identity
	Code  string
	PortA *PipePort //隔离开关A端口连接的管线
	PortB *PipePort //隔离开关B端口连接的管线
}

func NewDisconnector(id string, code string) *Disconnector {
	return &Disconnector{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_Disconnector},
		Code:     code,
	}
}
func (p *Disconnector) PortNum() int {
	return 2
}

// DisconnectorPort 隔离开关端口
//
// implement DevicePort
type DisconnectorPort struct {
	port    proto.Port
	breaker *Disconnector
}

func (p *DisconnectorPort) Port() proto.Port {
	return p.port
}
func (p *DisconnectorPort) Device() PortedDevice {
	return p.breaker
}

//////////////////////////////////////////////////////

// VoltageTransformer 变压器模型
// 一次侧端口A,二次侧端口B或C
type VoltageTransformer struct {
	Identity
	Code  string
	PortA *PipePort //变压器A端口连接的管线
	PortB *PipePort //变压器B端口连接的管线
	PortC *PipePort //变压器C端口连接的管线
}

func NewVoltageTransformer(id string, code string) *VoltageTransformer {
	return &VoltageTransformer{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_VoltageTransformer},
		Code:     code,
	}
}
func (p *VoltageTransformer) PortNum() int {
	if p.PortC == nil {
		return 2
	} else {
		return 3
	}
}

// VoltageTransformerPort 变压器端口
//
// implement DevicePort
type VoltageTransformerPort struct {
	port proto.Port
	vt   *VoltageTransformer
}

func (p *VoltageTransformerPort) Port() proto.Port {
	return p.port
}
func (p *VoltageTransformerPort) Device() PortedDevice {
	return p.vt
}

//////////////////////////////////////////////////////////

// PowerSource 电源模型
// 只有一个输出端口A
type PowerSource struct {
	Identity
	Code    string
	PortA   *PipePort //电源A端口连接的管线
	Ac      bool      //true-交流；false-直流
	Voltage uint32    //电压，单位V
}

func NewPowerSource(id string, code string, ac bool, voltage uint32) *PowerSource {
	return &PowerSource{
		Identity: &identity{id: id, deviceType: proto.DeviceType_DeviceType_PowerSource},
		Code:     code,
		Ac:       ac,
		Voltage:  voltage,
	}
}
func (p *PowerSource) PortNum() int {
	return 1
}

// PowerSourcePort 电源端口
//
// implement DevicePort
type PowerSourcePort struct {
	ps *PowerSource
}

func (p *PowerSourcePort) Port() proto.Port {
	return proto.Port_A
}
func (p *PowerSourcePort) Device() PortedDevice {
	return p.ps
}