Merge branch 'master' of https://git.code.tencent.com/jl-framework/rtss_simulation

component/pscada.go

@@ -0,0 +1,60 @@
+package component
+
+import (
+	"joylink.club/ecs"
+	"joylink.club/rtsssimulation/consts"
+)
+
+//电力系统相关组件定义
+
+// TransBusbar 输电母线
+type TransBusbar struct {
+	Vl   consts.VoltageLevel //电压等级
+	Elec consts.ElecYwEnum
+}
+
+// TwoPositionSwitch 对一条路通-断控制的开关状态
+// 如断路器
+// 如PT、负极柜隔离开关、轨电位、上网隔离开关、隔离开关
+type TwoPositionSwitch struct {
+	Position consts.SwitchTwoPosition
+}
+
+// /////////////////////////////////////////
+
+// ThreePositionSwitch 三工位开关
+// 对于三工位隔离开关，规定：ClosedPosition1-合闸到工作位，ClosedPosition2-合闸到接地位
+type ThreePositionSwitch struct {
+	Position consts.SwitchThreePosition
+}
+
+/////////////////////////////////////////////
+
+// HandcartSwitch 手车式开关
+type HandcartSwitch struct {
+	Position consts.HandcarPosition
+}
+
+//////////////////////////////////////////
+
+// ElecDevice 一般电力设备
+// 如：变压器、整流器
+// Epu所有状态如：35kV进线柜、35kV出线柜、1500V直流进线柜、配电变馈线柜、整流变馈线柜、35kV母联柜、500V直流馈线柜、1500V直流馈线柜、1500V直流负极柜
+// Epu状态中除去报警，如：400V进线柜、400V母联柜、三级负荷总开关、上网隔离开关柜、接口柜
+type ElecDevice struct {
+	State consts.EpuStateEnum
+}
+
+// DeviceNet 设备联网状态
+type DeviceNet struct {
+	Online bool //true-网络通信正常，false-通信中断
+}
+
+var (
+	ElecDeviceType          = ecs.NewComponentType[ElecDevice]()
+	DeviceNetType           = ecs.NewComponentType[DeviceNet]()
+	HandcartSwitchType      = ecs.NewComponentType[HandcartSwitch]()
+	ThreePositionSwitchType = ecs.NewComponentType[ThreePositionSwitch]()
+	TwoPositionSwitchType   = ecs.NewComponentType[TwoPositionSwitch]()
+	TransBusbarType         = ecs.NewComponentType[TransBusbar]()
+)

consts/pscada.go

@@ -0,0 +1,58 @@
+package consts
+
+// VoltageLevel 电压等级定义
+type VoltageLevel = uint8
+
+const (
+	VlNon     VoltageLevel = iota //未知电压等级
+	VlAc110Kv                     //110kV交流电   红色
+	VlAc35Kv                      //35kV交流电    黄色
+	VlAc400V                      //400V交流电    浅蓝色
+	VlDc1500V                     //1500V直流电
+)
+
+// ElecYwEnum 电的有无定义
+type ElecYwEnum = uint8
+
+const (
+	EywLossing   ElecYwEnum = iota //失电,未受电
+	EywReceiving                   //受电
+	EywStatic                      //静态
+)
+
+// SwitchThreePosition 三工位开关位置定义
+type SwitchThreePosition = uint8
+
+const (
+	StpClosedPosition1 SwitchThreePosition = iota + 1 //开关合闸到位置1，与位置1线路导通
+	StpClosedPosition2                                //开关合闸到位置2，与位置2线路导通
+	StpOpened                                         //开关分闸，线路断开，未与任何位置接通
+	StpFault                                          //异常
+)
+
+// SwitchTwoPosition 两工位开关位置定义
+type SwitchTwoPosition = uint8
+
+const (
+	S2pClosed SwitchTwoPosition = iota + 1 //开关合闸到位，与线路导通
+	S2pOpened                              //开关分闸，线路断开，未与任何位置接通
+	S2pFault                               //故障异常
+)
+
+// HandcarPosition 手车式开关位置定义
+type HandcarPosition = uint8
+
+const (
+	HpClosed HandcarPosition = iota + 1 //工作位合闸
+	HpOpened                            //工作位分闸
+	HpTest                              //实验位
+)
+
+// EpuStateEnum 一般电力设备状态定义
+type EpuStateEnum = uint8
+
+const (
+	EpuNormal EpuStateEnum = iota + 1 //正常
+	EpuFault                          //故障，有预告信号产生
+	EpuAlarm                          //报警，有事故信号产生
+)

entity/pscada.go

@@ -0,0 +1,56 @@
+package entity
+
+import (
+	"joylink.club/ecs"
+	"joylink.club/rtsssimulation/component"
+	"joylink.club/rtsssimulation/consts"
+)
+
+// NewTwoPositionSwitchEntity 创建两工位开关实体
+// 如断路器
+// 如PT、负极柜隔离开关、轨电位、上网隔离开关、隔离开关
+func NewTwoPositionSwitchEntity(w ecs.World, id string) *ecs.Entry {
+	e := w.Entry(w.Create(component.UidType, component.TwoPositionSwitchType, component.DeviceNetType))
+	component.UidType.SetValue(e, component.Uid{Id: id})
+	component.TwoPositionSwitchType.Set(e, &component.TwoPositionSwitch{Position: consts.S2pOpened})
+	component.DeviceNetType.Set(e, &component.DeviceNet{Online: true})
+	return e
+}
+
+// NewThreePositionSwitchEntity 创建三工位隔离开关实体
+func NewThreePositionSwitchEntity(w ecs.World, id string) *ecs.Entry {
+	e := w.Entry(w.Create(component.UidType, component.ThreePositionSwitchType, component.DeviceNetType))
+	component.UidType.SetValue(e, component.Uid{Id: id})
+	component.ThreePositionSwitchType.Set(e, &component.ThreePositionSwitch{Position: consts.StpOpened})
+	component.DeviceNetType.Set(e, &component.DeviceNet{Online: true})
+	return e
+}
+
+// NewElectricPowerDeviceEntity 创建一般电力设备实体
+// 如：变压器、整流器
+// Epu所有状态如：35kV进线柜、35kV出线柜、1500V直流进线柜、配电变馈线柜、整流变馈线柜、35kV母联柜、500V直流馈线柜、1500V直流馈线柜、1500V直流负极柜
+// Epu状态中除去报警，如：400V进线柜、400V母联柜、三级负荷总开关、上网隔离开关柜、接口柜
+func NewElectricPowerDeviceEntity(w ecs.World, id string) *ecs.Entry {
+	e := w.Entry(w.Create(component.UidType, component.ElecDeviceType, component.DeviceNetType))
+	component.UidType.SetValue(e, component.Uid{Id: id})
+	component.ElecDeviceType.Set(e, &component.ElecDevice{State: consts.EpuNormal})
+	component.DeviceNetType.Set(e, &component.DeviceNet{Online: true})
+	return e
+}
+
+// NewHandcartSwitchEntity 创建手车实体
+func NewHandcartSwitchEntity(w ecs.World, id string) *ecs.Entry {
+	e := w.Entry(w.Create(component.UidType, component.ThreePositionSwitchType, component.DeviceNetType))
+	component.UidType.SetValue(e, component.Uid{Id: id})
+	component.HandcartSwitchType.Set(e, &component.HandcartSwitch{Position: consts.HpOpened})
+	component.DeviceNetType.Set(e, &component.DeviceNet{Online: true})
+	return e
+}
+
+// NewTransBusbarEntity 创建输电母线实体
+func NewTransBusbarEntity(w ecs.World, id string) *ecs.Entry {
+	e := w.Entry(w.Create(component.UidType, component.TransBusbarType))
+	component.UidType.SetValue(e, component.Uid{Id: id})
+	component.TransBusbarType.Set(e, &component.TransBusbar{Vl: consts.VlNon, Elec: consts.EywLossing})
+	return e
+}