Merge branch 'master' of https://git.code.tencent.com/jl-framework/rtss_simulation

component/common.go

@@ -62,3 +62,5 @@ type Counter struct {
 }
 
 var CounterType = ecs.NewComponentType[Counter]()
+
+var LinkPositionType = ecs.NewComponentType[component_proto.LinkPosition]()

component/iscs_bas_air_conditioner.go

@@ -9,8 +9,4 @@ type AirConditioning struct {
 
 var (
 	AirConditioningType = ecs.NewComponentType[AirConditioning]() //空调
-
-	CombinationAirConditionerTag = ecs.NewTag() //组合式空调(变频空调)
-	AirConditioningGroupTag      = ecs.NewTag() //空调群控系统
-	AirConditionerTag            = ecs.NewTag() //空调器
 )

component/iscs_bas_air_pavilion.go

@@ -8,7 +8,5 @@ type AirPavilion struct {
 }
 
 var (
-	AirPavilionType      = ecs.NewComponentType[AirPavilion]() //风亭
-	ExhaustPavilionTag   = ecs.NewTag()                        //排风亭
-	AirSupplyPavilionTag = ecs.NewTag()                        //送风亭
+	AirPavilionType = ecs.NewComponentType[AirPavilion]() //风亭
 )

component/iscs_bas_pipe.go

@@ -115,10 +115,9 @@ func NewPipeFluid() *PipeFluid {
 }
 
 var (
-	PipeType            = ecs.NewComponentType[Pipe]()            //电线
-	PipeElectricityType = ecs.NewComponentType[PipeElectricity]() //电线电力
-	PipeFluidType       = ecs.NewComponentType[PipeFluid]()       //管线流体
-
+	PipeType              = ecs.NewComponentType[Pipe]()              //电线
+	PipeElectricityType   = ecs.NewComponentType[PipeElectricity]()   //电线电力
+	PipeFluidType         = ecs.NewComponentType[PipeFluid]()         //管线流体
 	ElectricitySourceType = ecs.NewComponentType[ElectricitySource]() //电源
 
 )

entity/balise.go

@@ -3,6 +3,7 @@ package entity
 import (
 	"joylink.club/ecs"
 	"joylink.club/rtsssimulation/component"
+	"joylink.club/rtsssimulation/component/component_proto"
 	"joylink.club/rtsssimulation/repository"
 	"joylink.club/rtsssimulation/repository/model/proto"
 )
@@ -10,9 +11,16 @@ import (
 // LoadBalises 加载应答器实体
 func LoadBalises(w ecs.World) error {
 	data := GetWorldData(w)
-	balises := data.Repo.ResponderList()
+	balises := data.Repo.TransponderList()
 	for _, b := range balises {
 		be := newBaliseEntity(w, b, data)
+		//应答器位置
+		be.AddComponent(component.LinkPositionType)
+		component.LinkPositionType.SetValue(be, component_proto.LinkPosition{
+			LinkId: b.LinkPosition().Link().Id(),
+			Offset: b.LinkPosition().Offset(),
+		})
+		//应答器类型
 		switch b.TransponderType() {
 		case proto.Transponder_FB:
 			be.AddComponent(component.BaliseFB)

entity/iscs_bas.go

@@ -34,19 +34,12 @@ func NewNetworkSwitchEntity(w ecs.World, id string) *ecs.Entry {
 }
 
 // NewAirPavilionEntity 创建风亭实体
-func NewAirPavilionEntity(w ecs.World, id string, apType proto.AirPavilion_Type) *ecs.Entry {
+func NewAirPavilionEntity(w ecs.World, id string) *ecs.Entry {
 	wd := GetWorldData(w)
 	e, ok := wd.EntityMap[id]
 	if !ok {
 		e = w.Entry(w.Create(component.UidType, component.AirPavilionType))
 		//
-		switch apType {
-		case proto.AirPavilion_ExhaustPavilion:
-			e.AddComponent(component.ExhaustPavilionTag)
-		case proto.AirPavilion_AirSupplyPavilion:
-			e.AddComponent(component.AirSupplyPavilionTag)
-		}
-		//
 		component.UidType.SetValue(e, component.Uid{Id: id})
 		component.AirPavilionType.Set(e, &component.AirPavilion{Normal: true})
 		wd.EntityMap[id] = e
@@ -93,15 +86,24 @@ func NewGasMixingChamberEntity(w ecs.World, id string) *ecs.Entry {
 	return e
 }
 
-// NewCombinationAirConditionerEntity 创建组合式空调实体
+// NewCombinationAirConditionerEntity 创建组合式空调(变频)实体
 func NewCombinationAirConditionerEntity(w ecs.World, id string) *ecs.Entry {
-	return newAirConditioningEntity(w, id, component.CombinationAirConditionerTag)
-}
-func newAirConditioningEntity(w ecs.World, id string, tag *ecs.ComponentType[struct{}]) *ecs.Entry {
 	wd := GetWorldData(w)
 	e, ok := wd.EntityMap[id]
 	if !ok {
-		e = w.Entry(w.Create(component.UidType, component.MotorType, component.AirConditioningType, component.DeviceExceptionType, tag))
+		e = w.Entry(w.Create(component.UidType, component.MotorType, component.MotorFcType, component.FluidDriverType, component.AirConditioningType, component.DeviceExceptionType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewAirConditionerEntity 创建空调实体
+func NewAirConditionerEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e = w.Entry(w.Create(component.UidType, component.MotorType, component.AirConditioningType, component.DeviceExceptionType))
 		component.UidType.SetValue(e, component.Uid{Id: id})
 		wd.EntityMap[id] = e
 	}

entity/iscs_load.go

@@ -57,7 +57,7 @@ func LoadIscs(w ecs.World) error {
 	}
 	//风亭(排风亭、送风亭)
 	for _, ap := range data.Repo.AirPavilionMap {
-		NewAirPavilionEntity(w, ap.Id(), ap.PavilionType)
+		NewAirPavilionEntity(w, ap.Id())
 	}
 	//阀门
 	for _, valve := range data.Repo.ValveMap {

proto/src/component/common.proto

@@ -51,6 +51,14 @@ message Counter {
     int32 step = 2;
 }
 
+// Link位置
+message LinkPosition{
+    //Link的ID
+    string linkId = 1;
+    //Link的偏移量
+    int64 offset = 2;
+}
+
 // 倒数/倒计时组件
 message CounterDown {
     int32 val = 1;

repository/repository.go

@@ -15,7 +15,7 @@ type Repository struct {
 	checkPointMap                map[string]*CheckPoint
 	turnoutMap                   map[string]*Turnout
 	signalMap                    map[string]*Signal
-	responderMap                 map[string]*Transponder
+	transponderMap               map[string]*Transponder
 	slopeMap                     map[string]*Slope
 	sectionalCurvatureMap        map[string]*SectionalCurvature
 	kilometerConvertMap          map[string]*proto.KilometerConvert
@@ -62,7 +62,7 @@ func newRepository(id string, version string) *Repository {
 		checkPointMap:                make(map[string]*CheckPoint),
 		turnoutMap:                   make(map[string]*Turnout),
 		signalMap:                    make(map[string]*Signal),
-		responderMap:                 make(map[string]*Transponder),
+		transponderMap:               make(map[string]*Transponder),
 		slopeMap:                     make(map[string]*Slope),
 		sectionalCurvatureMap:        make(map[string]*SectionalCurvature),
 		kilometerConvertMap:          make(map[string]*proto.KilometerConvert),
@@ -119,7 +119,7 @@ func (repo *Repository) FindById(id string) Identity {
 	if md, ok := repo.checkPointMap[id]; ok {
 		return md
 	}
-	if md, ok := repo.responderMap[id]; ok {
+	if md, ok := repo.transponderMap[id]; ok {
 		return md
 	}
 	if md, ok := repo.stationMap[id]; ok {
@@ -225,16 +225,16 @@ func (repo *Repository) SignalList() []*Signal {
 	}
 	return list
 }
-func (repo *Repository) ResponderList() []*Transponder {
+func (repo *Repository) TransponderList() []*Transponder {
 	var list []*Transponder
-	for _, model := range repo.responderMap {
+	for _, model := range repo.transponderMap {
 		list = append(list, model)
 	}
 	return list
 }
 func (repo *Repository) ResponderListByLink(linkId string) []*Transponder {
 	var list []*Transponder
-	for _, model := range repo.responderMap {
+	for _, model := range repo.transponderMap {
 		if model.linkPosition.link.Id() == linkId {
 			list = append(list, model)
 		}
@@ -336,7 +336,7 @@ func (repo *Repository) FindModel(deviceId string, deviceType proto.DeviceType)
 	case proto.DeviceType_DeviceType_Signal:
 		return repo.signalMap[deviceId], nil
 	case proto.DeviceType_DeviceType_Transponder:
-		return repo.responderMap[deviceId], nil
+		return repo.transponderMap[deviceId], nil
 	case proto.DeviceType_DeviceType_Slope:
 		return repo.slopeMap[deviceId], nil
 	case proto.DeviceType_DeviceType_SectionalCurvature:
@@ -396,7 +396,7 @@ func (repo *Repository) FindLink(id string) *Link {
 	return repo.linkMap[id]
 }
 func (repo *Repository) FindTransponder(id string) *Transponder {
-	return repo.responderMap[id]
+	return repo.transponderMap[id]
 }
 func (repo *Repository) FindTurnout(id string) *Turnout {
 	return repo.turnoutMap[id]
@@ -419,7 +419,7 @@ func (repo *Repository) FindPsd(id string) *Psd {
 	return repo.psdMap[id]
 }
 
-func (repo *Repository) FindPlatfrom(id string) *Platform {
+func (repo *Repository) FindPlatform(id string) *Platform {
 	return repo.platformMap[id]
 }
 
@@ -499,7 +499,7 @@ func (repo *Repository) generateCoordinateInfo(coordinateSystem string) error {
 	return nil
 }
 
-func (repo Repository) GetCoordinateInfo() *MapCoordinate {
+func (repo *Repository) GetCoordinateInfo() *MapCoordinate {
 	return repo.coordinate
 }
 

repository/repository_manager.go

@@ -85,7 +85,7 @@ func buildModels(source *proto.Repository, repository *Repository) error {
 	}
 	for _, protoData := range source.Transponders {
 		m := NewTransponder(protoData.Id, protoData.Km, protoData.FixedTelegram, protoData.Type)
-		repository.responderMap[m.Id()] = m
+		repository.transponderMap[m.Id()] = m
 	}
 	for _, protoData := range source.Slopes {
 		m := NewSlope(protoData.Id, protoData.Kms, protoData.Degree)
@@ -346,7 +346,7 @@ func buildCheckPointRelationShip(source *proto.Repository, repo *Repository) err
 
 func buildResponderRelationShip(source *proto.Repository, repository *Repository) error {
 	for _, protoData := range source.Transponders {
-		responder := repository.responderMap[protoData.Id]
+		responder := repository.transponderMap[protoData.Id]
 		//应答器和区段相互关联
 		if protoData.SectionId != "" {
 			interrelateResponderAndPhysicalSection(responder, repository.physicalSectionMap[protoData.SectionId])
@@ -595,11 +595,7 @@ func buildLinks(repo *Repository) error {
 		//以始端道岔的公里标作为Link零点的公里标
 		linkZeroKm := startTp.turnout.km
 		//创建基础Link
-		link := &Link{
-			Identity: identity{
-				id:         strconv.Itoa(linkIdGenerator), //由于发给动力学的link的id是数字，所以这里也用数字
-				deviceType: proto.DeviceType_DeviceType_Link,
-			}}
+		link := NewLink(strconv.Itoa(linkIdGenerator)) //由于发给动力学的link的id是数字，所以这里也用数字
 		linkIdGenerator++
 		//以此道岔端口作为Link的A端节点
 		interrelateLinkAndTurnout(repo, linkZeroKm, startTp, &LinkPort{link, proto.Port_A})

repository/transponder.go

@@ -8,7 +8,7 @@ type Transponder struct {
 	km *proto.Kilometer
 	//section     *PhysicalSection
 	//turnoutPort TurnoutPort
-	linkPosition  *LinkPosition
+	linkPosition  *LinkPosition          //此位置是应答器初始位置，当前位置需从应答器实体中获取
 	fixedTelegram []byte                 //无源应答器固定报文
 	baliseType    proto.Transponder_Type //应答器类型
 }
@@ -31,13 +31,6 @@ func (t *Transponder) bindLinkPosition(position *LinkPosition) {
 	t.linkPosition = position
 }
 
-//	func (r *Transponder) bindSection(section *PhysicalSection) {
-//		r.section = section
-//	}
-//
-//	func (r *Transponder) bindTurnoutPort(turnoutPort TurnoutPort) {
-//		r.turnoutPort = turnoutPort
-//	}
 func (t *Transponder) LinkPosition() *LinkPosition {
 	return t.linkPosition
 }

sys/iscs_sys/iscs_bas_air_conditioner.go

@@ -22,5 +22,10 @@ func (s *AirConditionerSystem) Update(w ecs.World) {
 		air := component.AirConditioningType.Get(entry)
 		//
 		air.Running = motor.Speed > 0
+		//
+		if entry.HasComponent(component.FluidDriverType) {
+			fd := component.FluidDriverType.Get(entry)
+			fd.On = motor.Speed > 0
+		}
 	})
 }

sys/iscs_sys/iscs_bas_fluid.go

@@ -13,17 +13,17 @@ import (
 
 // FluidDriverSystem 流体驱动系统
 // 实现流体在设备、管线中流动
-// 流体驱动源(风机、送风亭、泵)
+// 流体驱动源(风机、泵、组合式空调)
 type FluidDriverSystem struct {
-	query          *ecs.Query                 //流体驱动源
-	drivePathMap   map[string][]*SearchedPath //key pipePortId,value 驱动源驱动流体的路径
-	queryFluidPipe *ecs.Query
+	queryFluidDriver *ecs.Query                 //流体驱动源
+	drivePathMap     map[string][]*SearchedPath //key pipePortId,value 驱动源驱动流体的路径
+	queryFluidPipe   *ecs.Query
 }
 
 func NewFluidDriverSystem() *FluidDriverSystem {
 	return &FluidDriverSystem{
-		query:          ecs.NewQuery(filter.Contains(component.UidType, component.FluidDriverType)),
-		queryFluidPipe: ecs.NewQuery(filter.Contains(component.UidType, component.PipeFluidType)),
+		queryFluidDriver: ecs.NewQuery(filter.Contains(component.UidType, component.FluidDriverType)),
+		queryFluidPipe:   ecs.NewQuery(filter.Contains(component.UidType, component.PipeFluidType)),
 	}
 }
 
@@ -38,7 +38,9 @@ func (s *FluidDriverSystem) findFluidPath(fromDevice repository.Identity, fromDe
 	return sp
 }
 func (s *FluidDriverSystem) Update(w ecs.World) {
-
+	s.queryFluidDriver.Each(w, func(entry *ecs.Entry) {
+		//fdId := component.UidType.Get(entry).Id
+	})
 }
 
 // 判断路径是否畅通
@@ -110,7 +112,7 @@ func newFluidDriverPathSearcher(fromDevice repository.Identity, fromDevicePortPi
 func (s *fluidDriverPathSearcher) search() []*SearchedPath {
 	var rt []*SearchedPath
 	if !s.exclude(s.fromDevicePortPipe.Device().Id()) {
-		searchContext := &fluidPath{}
+		searchContext := &fluidPath{viaPipeFittings: make(map[string]string)}
 		searchContext.addPipe(s.fromDevicePortPipe)
 		s.doSearch(searchContext)
 	} else {
@@ -149,50 +151,67 @@ func (s *fluidDriverPathSearcher) addSearchedPath(searchContext *fluidPath) {
 	s.searchedPaths = append(s.searchedPaths, searchContext)
 }
 
-// 递归搜索
+// 搜索
 func (s *fluidDriverPathSearcher) doSearch(searchContext *fluidPath) {
-	nextViaPipes := searchContext.nextViaPathPipes()
+	nextViaPipes, end := searchContext.nextViaPathPipes()
 	lenNextPipes := len(nextViaPipes)
-	if lenNextPipes == 0 {
+	if end {
 		s.addSearchedPath(searchContext)
-	} else if lenNextPipes == 1 {
-		if !searchContext.viaPipe(nextViaPipes[0].Device().Id()) && !s.exclude(nextViaPipes[0].Device().Id()) {
-			searchContext.addPipe(nextViaPipes[0])
-			s.doSearch(searchContext)
-		}
 	} else {
-		for _, nextViaPipe := range nextViaPipes {
-			if searchContext.viaPipe(nextViaPipe.Device().Id()) { //舍弃回头路径
-				continue
+		if lenNextPipes == 1 {
+			if !searchContext.viaPipe(nextViaPipes[0].Device().Id()) && !s.exclude(nextViaPipes[0].Device().Id()) {
+				searchContext.addPipe(nextViaPipes[0])
+				s.doSearch(searchContext)
 			}
-			if s.exclude(nextViaPipe.Device().Id()) { //舍弃排除路径
-				continue
+		} else {
+			for _, nextViaPipe := range nextViaPipes {
+				if searchContext.viaPipe(nextViaPipe.Device().Id()) { //舍弃回头路径
+					continue
+				}
+				if s.exclude(nextViaPipe.Device().Id()) { //舍弃排除路径
+					continue
+				}
+				//
+				cp := searchContext.clone()
+				cp.addPipe(nextViaPipe)
+				s.doSearch(cp)
 			}
-			//
-			cp := searchContext.clone()
-			cp.addPipe(nextViaPipe)
-			s.doSearch(cp)
 		}
 	}
 }
 
-func (p *fluidPath) nextViaPathPipes() []repository.PipePort {
+// 从当前管线找下一个管线
+// 泵、风机、空调 提供驱动力，承接进出
+// 返回bool : true-搜索达终点
+func (p *fluidPath) nextViaPathPipes() ([]repository.PipePort, bool) {
 	nextDevice := p.nextDevice()
+	//
 	switch nextDevice.Type() {
 	case proto.DeviceType_DeviceType_PipeFitting:
-		return p.nextDeviceViaPipes(nextDevice.(*repository.PipeFitting).Ports(), p.curPipe)
+		{
+			if _, has := p.viaPipeFittings[nextDevice.Id()]; has { //排除已经经过的管件的路径
+				return nil, false
+			} else {
+				p.viaPipeFittings[nextDevice.Id()] = nextDevice.Id()
+				return p.nextDeviceViaPipes(nextDevice.(*repository.PipeFitting).Ports(), p.curPipe), false
+			}
+		}
 	case proto.DeviceType_DeviceType_Valve:
-		return p.nextDeviceViaPipes(nextDevice.(*repository.Valve).Ports(), p.curPipe)
-	case proto.DeviceType_DeviceType_GasMixingChamber:
-		return p.nextGasMixingChamberViaPipes(nextDevice.(*repository.GasMixingChamber), p.curPipe)
-	case proto.DeviceType_DeviceType_CombinationAirConditioner:
-		return p.nextCombinationAirConditionerViaPipes(nextDevice.(*repository.CombinationAirConditioner), p.curPipe)
-	case proto.DeviceType_DeviceType_AirPurificationDevice:
-		return p.nextDeviceViaPipes(nextDevice.(*repository.AirPurificationDevice).Ports(), p.curPipe)
+		return p.nextDeviceViaPipes(nextDevice.(*repository.Valve).Ports(), p.curPipe), false
+	case proto.DeviceType_DeviceType_GasMixingChamber: //静压箱
+		return p.nextGasMixingChamberViaPipes(nextDevice.(*repository.GasMixingChamber), p.curPipe), false
+	case proto.DeviceType_DeviceType_AirPurificationDevice: //净化装置
+		return p.nextDeviceViaPipes(nextDevice.(*repository.AirPurificationDevice).Ports(), p.curPipe), false
+	case proto.DeviceType_DeviceType_Environment: //环境
+		fallthrough
+	case proto.DeviceType_DeviceType_AirPavilion: //风亭
+		fallthrough
+	case proto.DeviceType_DeviceType_CombinationAirConditioner: //组合式空调
+		return nil, true //路径搜索终点
 	default:
 		slog.Warn("管线路径中的设备[%d]无法处理", nextDevice.Type())
 	}
-	return nil
+	return nil, false //排除(舍弃)该路径搜索
 }
 
 ///////////////////////////////////////////////////////////////////////////////////////////
@@ -240,8 +259,9 @@ func (p *fluidPath) nextGasMixingChamberViaPipes(nextDevice *repository.GasMixin
 }
 
 type fluidPath struct {
-	curPipe  repository.PipePort   //路径中当前有向管线
-	viaPipes []repository.PipePort //路径所经过的有向管线
+	curPipe         repository.PipePort   //路径中当前有向管线
+	viaPipes        []repository.PipePort //路径所经过的有向管线
+	viaPipeFittings map[string]string     //经过的管件，用于排除闭环路径，key和value均为deviceId
 }
 
 func (p *fluidPath) addPipe(viaPipe repository.PipePort) {
@@ -257,8 +277,11 @@ func (p *fluidPath) viaPipe(pipeId string) bool {
 	return false
 }
 func (p *fluidPath) clone() *fluidPath {
-	cp := &fluidPath{viaPipes: make([]repository.PipePort, 0, len(p.viaPipes)), curPipe: p.curPipe}
+	cp := &fluidPath{viaPipes: make([]repository.PipePort, 0, len(p.viaPipes)), curPipe: p.curPipe, viaPipeFittings: make(map[string]string)}
 	copy(cp.viaPipes, p.viaPipes)
+	for k, v := range p.viaPipeFittings {
+		cp.viaPipeFittings[k] = v
+	}
 	return cp
 }
 func (p *fluidPath) nextDevice() repository.Identity {