ISCS环境与设备监控系统ecs定义

component/iscs_bas_flow_switch.go

@@ -0,0 +1,20 @@
+package component
+
+import (
+	"joylink.club/ecs"
+	"joylink.club/rtsssimulation/consts"
+)
+
+// FlowSwitch 流量开关
+//
+// 主要是在水、气、油等介质管路中在线或者插入式安装监控水系统中水流量的大小。
+// 在水流量高于或者低于某一个设定点时候触发输出报警信号传递给机组，
+// 系统获取信号后即可作出相应的指示动作。避免或减少主机“干烧”。
+type FlowSwitch struct {
+	Open      bool                       //true-开启；false-关闭
+	Exception consts.DeviceExceptionEnum //具体异常-通信中断
+}
+
+var (
+	FlowSwitchType = ecs.NewComponentType[FlowSwitch]()
+)

component/iscs_bas_guidance.go

@@ -0,0 +1,90 @@
+package component
+
+import "joylink.club/ecs"
+
+//BAS 导向
+
+// LightingGuidance 照明导向
+type LightingGuidance struct {
+	Guidance LightingGd
+}
+
+// LightingGd 照明导向定义
+type LightingGd = uint8
+
+const (
+	LightingGdOpen                   LightingGd = iota //照明开启
+	LightingGdClose                                    //照明关闭
+	LightingGdAbnormal                                 //照明异常
+	LightingGdCommunicationInterrupt                   //照明通信中断
+)
+
+///////////////////////////
+
+// PowerSwitchGuidance 电源开关导向
+type PowerSwitchGuidance struct {
+	Guidance PowerSwitchGd
+}
+
+// PowerSwitchGd 电源开关导向定义
+type PowerSwitchGd = uint8
+
+const (
+	PowerSwitchGdOpen                   PowerSwitchGd = iota //电源开关分闸
+	PowerSwitchGdClose                                       //电源开关合闸
+	PowerSwitchGdAbnormal                                    //电源开关异常
+	PowerSwitchGdCommunicationInterrupt                      //电源开关通信中断
+)
+
+/////////////////////////////
+
+// EscalatorGuidance 扶梯导向
+type EscalatorGuidance struct {
+	Guidance EscalatorGd
+}
+
+// EscalatorGd 扶梯导向定义
+type EscalatorGd = uint8
+
+const (
+	EscalatorGdOpen                   EscalatorGd = iota //扶梯开启
+	EscalatorGdClose                                     //扶梯关闭
+	EscalatorGdAbnormal                                  //扶梯异常
+	EscalatorGdCommunicationInterrupt                    //扶梯通信中断
+)
+
+////////////////////////////////
+
+// TicketGateGuidance 闸机导向
+type TicketGateGuidance struct {
+	Guidance TicketGateGd
+}
+
+// TicketGateGd 闸机导向定义
+type TicketGateGd = uint8
+
+const (
+	TicketGateGdZ1F1                   TicketGateGd = iota //正通反通
+	TicketGateGdZ1F0                                       //正通反禁
+	TicketGateGdZ0F1                                       //正禁反通
+	TicketGateGdZ0F0                                       //正禁反禁
+	TicketGateGdAbnormal                                   //闸机异常
+	TicketGateGdCommunicationInterrupt                     //闸机通信中断
+)
+
+///////////////////////////////////////
+
+// SectionEvacuationGuidance 区间疏散导向指示
+type SectionEvacuationGuidance struct {
+	Open bool //true-开；false-关
+}
+
+////////////////////////////////////////
+
+var (
+	LightingGuidanceType          = ecs.NewComponentType[LightingGuidance]()
+	PowerSwitchGuidanceType       = ecs.NewComponentType[PowerSwitchGuidance]()
+	EscalatorGuidanceType         = ecs.NewComponentType[EscalatorGuidance]()
+	TicketGateGuidanceType        = ecs.NewComponentType[TicketGateGuidance]()
+	SectionEvacuationGuidanceType = ecs.NewComponentType[SectionEvacuationGuidance]()
+)

component/iscs_bas_sensor.go

@@ -0,0 +1,25 @@
+package component
+
+import "joylink.club/ecs"
+
+// Sensor 传感器
+type Sensor struct {
+	Value float32
+}
+
+// ThSensor 温湿度传感器
+type ThSensor struct {
+	T float32 //温度
+	H float32 //湿度
+}
+
+var (
+	SensorType   = ecs.NewComponentType[Sensor]()
+	ThSensorType = ecs.NewComponentType[ThSensor]()
+
+	CO2SensorTag         = ecs.NewTag() //CO2 传感器
+	WaterTSensorTag      = ecs.NewTag() //水温传感器
+	PressureSensorTag    = ecs.NewTag() //压力传感器
+	FlowSensorTag        = ecs.NewTag() //流量传感器
+	TemperatureSensorTag = ecs.NewTag() //温度传感器
+)

component/iscs_bas_valve.go

@@ -5,9 +5,11 @@ import (
 	"joylink.club/rtsssimulation/consts"
 )
 
+// 阀门开关
+
 // ElectricControlValve 电动调节阀
 //
-// 电动风阀、电动调节阀、组合式风阀
+// 电动风阀、电动调节阀、组合式风阀、电动两通调节阀、电动蝶阀
 type ElectricControlValve struct {
 	Opened    bool                       //true-开到位
 	Closed    bool                       //true-关到位
@@ -19,10 +21,19 @@ type ElectricControlValve struct {
 // ElectricControlValveOperationTime 电动调节阀动作耗时，ms
 const ElectricControlValveOperationTime int = 4000
 
+// ControlValve 调节阀
+type ControlValve struct {
+	OpenRate uint8 //开度，0-100%
+}
+
 var (
 	ElectricControlValveType = ecs.NewComponentType[ElectricControlValve]()
 
 	ElectricAirValveTag       = ecs.NewTag() //电动风阀标签
 	CombinationAirValveTag    = ecs.NewTag() //组合式风阀
 	ElectricTwoWayValveTag    = ecs.NewTag() //电动两通调节阀
+	ElectricButterflyValveTag = ecs.NewTag() //电动蝶阀
+
+	ControlValveType     = ecs.NewComponentType[ControlValve]()
+	BypassValveSwitchTag = ecs.NewTag() //旁通阀开关(ControlValve)
 )

component/iscs_bas_water_closed_container.go

@@ -0,0 +1,18 @@
+package component
+
+import (
+	"joylink.club/ecs"
+	"joylink.club/rtsssimulation/consts"
+)
+
+// WaterClosedContainer 水封闭式容器,如冷却塔、水处理器
+type WaterClosedContainer struct {
+	Running   bool                       //true-正常运行；false-停止
+	Exception consts.DeviceExceptionEnum //具体异常-故障、异常、通信中断
+}
+
+var (
+	WaterClosedContainerType = ecs.NewComponentType[WaterClosedContainer]()
+	CoolingTowerTag          = ecs.NewTag() //冷却塔
+	WaterProcessorTag        = ecs.NewTag() //水处理器
+)

entity/iscs_bas.go

@@ -74,6 +74,13 @@ func NewElectricTwoWayValveEntity(w ecs.World, id string) *ecs.Entry {
 	return entry
 }
 
+// NewElectricButterflyValveEntity 创建电动蝶阀实体
+func NewElectricButterflyValveEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewElectricControlValveEntity(w, id)
+	entry.AddComponent(component.ElectricButterflyValveTag)
+	return entry
+}
+
 // NewPurificationDeviceEntity 创建净化装置实体
 func NewPurificationDeviceEntity(w ecs.World, id string) *ecs.Entry {
 	wd := GetWorldData(w)
@@ -152,3 +159,160 @@ func NewWaterTankEntity(w ecs.World, id string) *ecs.Entry {
 	}
 	return e
 }
+
+// NewWaterClosedContainerEntity 创建封闭式水容器，如冷却塔、水处理器
+func NewWaterClosedContainerEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.WaterClosedContainerType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewCoolingTowerEntity 创建冷却塔实体
+func NewCoolingTowerEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewWaterClosedContainerEntity(w, id)
+	entry.AddComponent(component.CoolingTowerTag)
+	return entry
+}
+
+// NewWaterProcessorEntity 创建水处理器实体
+func NewWaterProcessorEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewWaterClosedContainerEntity(w, id)
+	entry.AddComponent(component.WaterProcessorTag)
+	return entry
+}
+
+// NewBypassValveSwitchEntity 创建旁通阀开关实体
+func NewBypassValveSwitchEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.ControlValveType, component.BypassValveSwitchTag))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewSensorEntity 创建传感器实体
+func NewSensorEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.SensorType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewThSensorEntity 创建温湿度传感器实体
+func NewThSensorEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.ThSensorType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewCO2SensorEntity CO2 传感器
+func NewCO2SensorEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewSensorEntity(w, id)
+	entry.AddComponent(component.CO2SensorTag)
+	return entry
+}
+
+// NewWaterTSensorEntity 水温传感器
+func NewWaterTSensorEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewSensorEntity(w, id)
+	entry.AddComponent(component.WaterTSensorTag)
+	return entry
+}
+
+// NewPressureSensorEntity 压力传感器
+func NewPressureSensorEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewSensorEntity(w, id)
+	entry.AddComponent(component.PressureSensorTag)
+	return entry
+}
+
+// NewFlowSensorEntity 流量传感器
+func NewFlowSensorEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewSensorEntity(w, id)
+	entry.AddComponent(component.FlowSensorTag)
+	return entry
+}
+
+// NewTemperatureSensorEntity 温度传感器
+func NewTemperatureSensorEntity(w ecs.World, id string) *ecs.Entry {
+	entry := NewSensorEntity(w, id)
+	entry.AddComponent(component.TemperatureSensorTag)
+	return entry
+}
+
+// NewLightingGuidanceEntity 创建照明导向实体
+func NewLightingGuidanceEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.LightingGuidanceType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewPowerSwitchGuidanceEntity 创建电源开关导向实体
+func NewPowerSwitchGuidanceEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.PowerSwitchGuidanceType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewEscalatorGuidanceEntity 创建扶梯导向实体
+func NewEscalatorGuidanceEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.EscalatorGuidanceType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewTicketGateGuidanceEntity 创建闸机导向实体
+func NewTicketGateGuidanceEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.TicketGateGuidanceType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}
+
+// NewSectionEvacuationGuidanceEntity 创建区间疏散导向实体
+func NewSectionEvacuationGuidanceEntity(w ecs.World, id string) *ecs.Entry {
+	wd := GetWorldData(w)
+	e, ok := wd.EntityMap[id]
+	if !ok {
+		e := w.Entry(w.Create(component.UidType, component.SectionEvacuationGuidanceType))
+		component.UidType.SetValue(e, component.Uid{Id: id})
+		wd.EntityMap[id] = e
+	}
+	return e
+}

fi/iscs_bas.go

@@ -301,3 +301,49 @@ func WaterPumpOperate(w ecs.World, deviceId string, optRun bool) error {
 	})
 	return r.Err
 }
+
+// WaterClosedContainerOperate 封闭式水容器(如冷却塔、水处理器)
+//
+// optRun : true-正常运行；false-停止
+func WaterClosedContainerOperate(w ecs.World, deviceId string, optRun bool) error {
+	r := <-ecs.Request[ecs.EmptyType](w, func() ecs.Result[ecs.EmptyType] {
+		wd := entity.GetWorldData(w)
+		deviceEntry, ok := wd.EntityMap[deviceId]
+		if !ok {
+			return ecs.NewErrResult(fmt.Errorf("设备[%s]实体不存在", deviceId))
+		}
+		//
+		if !(deviceEntry.HasComponent(component.WaterClosedContainerType)) {
+			return ecs.NewErrResult(fmt.Errorf("设备[%s]不是封闭式水容器(如冷却塔、水处理器)", deviceId))
+		}
+		container := component.WaterPumpType.Get(deviceEntry)
+		container.Running = optRun
+		//
+		return ecs.NewOkEmptyResult()
+	})
+	return r.Err
+}
+
+// BypassValveSwitchOperate 旁通阀开关操作
+//
+// openRate 旁通阀开关打开百分比[0,100]
+func BypassValveSwitchOperate(w ecs.World, deviceId string, openRate uint8) error {
+	if openRate < 0 || openRate > 100 {
+		return fmt.Errorf("旁通阀开关打开百分比值须在[0,100]范围内")
+	}
+	r := <-ecs.Request[ecs.EmptyType](w, func() ecs.Result[ecs.EmptyType] {
+		wd := entity.GetWorldData(w)
+		deviceEntry, ok := wd.EntityMap[deviceId]
+		if !ok {
+			return ecs.NewErrResult(fmt.Errorf("设备[%s]实体不存在", deviceId))
+		}
+		//
+		if !(deviceEntry.HasComponent(component.ControlValveType) && deviceEntry.HasComponent(component.BypassValveSwitchTag)) {
+			return ecs.NewErrResult(fmt.Errorf("设备[%s]不是旁通阀开关", deviceId))
+		}
+		component.ControlValveType.Get(deviceEntry).OpenRate = openRate
+		//
+		return ecs.NewOkEmptyResult()
+	})
+	return r.Err
+}

sys/iscs_sys/iscs_bas_water_closed_container.go

@@ -0,0 +1,34 @@
+package iscs_sys
+
+import (
+	"joylink.club/ecs"
+	"joylink.club/ecs/filter"
+	"joylink.club/rtsssimulation/component"
+	"joylink.club/rtsssimulation/consts"
+)
+
+// WaterClosedContainerSystem 封闭冷却塔、水处理器
+type WaterClosedContainerSystem struct {
+	query *ecs.Query
+}
+
+func NewWaterClosedContainerSystem() *WaterClosedContainerSystem {
+	return &WaterClosedContainerSystem{
+		query: ecs.NewQuery(filter.Contains(component.WaterClosedContainerType)),
+	}
+}
+func (s *WaterClosedContainerSystem) Update(w ecs.World) {
+	s.query.Each(w, func(entry *ecs.Entry) {
+		container := component.WaterClosedContainerType.Get(entry)
+		container.Exception = consts.DeviceExceptionNon
+		if entry.HasComponent(component.DeviceFaultTag) {
+			container.Exception = consts.DeviceFault
+		}
+		if entry.HasComponent(component.DeviceAbnormalTag) {
+			container.Exception = consts.DeviceAbnormal
+		}
+		if entry.HasComponent(component.DeviceCommunicationInterruptTag) {
+			container.Exception = consts.DeviceCommunicationInterrupt
+		}
+	})
+}