package repository

import (
	"errors"
	"fmt"
	"log/slog"
	"math"
	"strconv"

	"go.uber.org/zap"
	"joylink.club/rtsssimulation/repository/model/proto"
	"joylink.club/rtsssimulation/util/number"
)

var repositoryMap = make(map[string]*Repository)

func BuildRepository(source *proto.Repository) (*Repository, error) {
	errMsg := baseCheck(source)
	if len(errMsg) != 0 {
		println("-------------------- 数据异常信息 --------------------")
		for _, s := range errMsg {
			println(s)
		}
		return nil, errors.New("数据校验未通过")
	}
	repository := newRepository(source.Id, source.Version)
	buildModels(source, repository)
	zap.S().Debug("基础模型构建完毕")
	err := buildModelRelationship(source, repository)
	zap.S().Debug("模型关系构建完毕")
	if err != nil {
		return nil, err
	}
	err = buildLinksAndRelate(repository)
	zap.S().Debug("构建Link并与模型关联完毕")
	if err != nil {
		return nil, err
	}
	repositoryMap[buildRepositoryKey(source.Id, source.Version)] = repository
	return repository, err
}
func FindRepository(id string, version string) *Repository {
	return repositoryMap[buildRepositoryKey(id, version)]
}

func buildRepositoryKey(id string, version string) string {
	return id + "_" + version
}

func buildModels(source *proto.Repository, repository *Repository) {
	for _, protoData := range source.KilometerConverts {
		repository.addKilometerConvert(protoData)
	}
	for _, protoData := range source.PhysicalSections {
		m := NewPhysicalSection(protoData.Id)
		repository.physicalSectionMap[m.Id()] = m
	}
	for _, protoData := range source.CheckPoints {
		m := NewCheckPoint(protoData.Id, protoData.Km, protoData.Type)
		repository.checkPointMap[m.Id()] = m
	}
	for _, protoData := range source.Turnouts {
		m := NewTurnout(protoData.Id, protoData.Km, protoData.SwitchMachineType)
		repository.turnoutMap[m.Id()] = m
	}
	for _, protoData := range source.Signals {
		m := NewSignal(protoData.Id, protoData.Km, protoData.Code)
		repository.signalMap[m.Id()] = m
	}
	for _, protoData := range source.Transponders {
		m := NewTransponder(protoData.Id, protoData.Km)
		repository.responderMap[m.Id()] = m
	}
	for _, protoData := range source.Slopes {
		m := NewSlope(protoData.Id, protoData.Kms, protoData.Degree)
		repository.slopeMap[m.Id()] = m
	}
	for _, protoData := range source.SectionalCurvatures {
		m := NewSectionalCurvature(protoData.Id, protoData.Kms, protoData.Radius)
		repository.sectionalCurvatureMap[m.Id()] = m
	}
	for _, protoData := range source.Relays {
		m := newRelay(protoData.Id, protoData.Code, protoData.Model)
		repository.relayMap[m.Id()] = m
	}
	for _, protoData := range source.PhaseFailureProtectors {
		m := newPhaseFailureProtector(protoData.Id, protoData.Code)
		repository.phaseFailureProtectorMap[m.Id()] = m
	}
	for _, protoData := range source.Buttons {
		m := NewButton(protoData.Id, protoData.Code, protoData.ButtonType)
		if protoData.HasLight {
			m.HasLight()
		}
		repository.buttonMap[m.Id()] = m
	}
	for _, protoData := range source.Psds {
		m := newPsd(protoData.Id)
		repository.psdMap[m.Id()] = m
	}

	for _, protoData := range source.Lights {
		m := NewLight(protoData.Id, protoData.Code)
		repository.lightMap[m.Id()] = m
	}
	for _, protoData := range source.Alarms {
		m := NewAlarm(protoData.Id, protoData.Code)
		repository.alarmMap[m.Id()] = m
	}
	for _, protoData := range source.Stations {
		m := NewStation(protoData.Id, protoData.Code)
		repository.stationMap[m.Id()] = m
	}
	for _, protoData := range source.Mkxs {
		m := NewMkx(protoData.Id)
		repository.mkxMap[m.Id()] = m
	}
	repository.generateCoordinateInfo()
}

func buildModelRelationship(source *proto.Repository, repository *Repository) error {
	err := buildCheckPointRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = buildPhysicalSectionRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = buildTurnoutRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = buildSignalRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = buildResponderRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = buildPsdRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = buildMkxRelationShip(source, repository)
	if err != nil {
		return err
	}
	err = completeTurnoutPortKm(repository)
	if err != nil {
		return err
	}
	err = buildStationRelationShip(source, repository)
	if err != nil {
		return err
	}
	return err
}

func buildMkxRelationShip(source *proto.Repository, repo *Repository) error {
	for _, protoData := range source.Mkxs {
		mkx := repo.mkxMap[protoData.Id]
		for _, group := range protoData.ElectronicComponentGroups {
			var components []IGroupedElectronicComponent
			for _, id := range group.GetComponentIds() {
				if relay := repo.relayMap[id]; relay != nil {
					components = append(components, relay)
				}
			}
			mkx.componentGroups = append(mkx.componentGroups, &ElectronicComponentGroup{
				code:       group.Code,
				components: components,
			})
		}
		for _, buttonId := range protoData.PcbButtonIds {
			if button := repo.buttonMap[buttonId]; button != nil {
				mkx.pcbButtons = append(mkx.pcbButtons, button)
			}
		}
		for _, buttonId := range protoData.PobButtonIds {
			if button := repo.buttonMap[buttonId]; button != nil {
				mkx.pobButtons = append(mkx.pobButtons, button)
			}
		}
		for _, buttonId := range protoData.PabButtonIds {
			if button := repo.buttonMap[buttonId]; button != nil {
				mkx.pabButtons = append(mkx.pabButtons, button)
			}
		}
	}
	return nil
}

func buildPsdRelationShip(source *proto.Repository, repo *Repository) error {
	for _, protoData := range source.Psds {
		psd := repo.psdMap[protoData.Id]
		for _, group := range protoData.ElectronicComponentGroups {
			var components []IGroupedElectronicComponent
			for _, id := range group.GetComponentIds() {
				if relay := repo.relayMap[id]; relay != nil {
					components = append(components, relay)
				}
			}
			psd.componentGroups = append(psd.componentGroups, &ElectronicComponentGroup{
				code:       group.Code,
				components: components,
			})
		}
	}
	return nil
}

// 补全道岔端口的公里标
func completeTurnoutPortKm(repo *Repository) error {
	ports := []proto.Port{proto.Port_A, proto.Port_B, proto.Port_C}
	for _, turnout := range repo.turnoutMap {
		for _, port := range ports {
			tpKm := turnout.findBoundaryKmByPort(port)
			if tpKm == nil {
				dp := turnout.findDevicePortByPort(port)
				otherTurnout := repo.turnoutMap[dp.Device().Id()]
				otherKm, err := convertKilometer(repo, otherTurnout.km, turnout.km.CoordinateSystem)
				if err != nil {
					return err
				}
				km := &proto.Kilometer{
					Value:            (turnout.km.Value + otherKm.Value) / 2,
					CoordinateSystem: turnout.km.CoordinateSystem,
					Direction:        turnout.km.Direction,
				}
				err = turnout.bindBoundaryKm(km, port)
				if err != nil {
					return err
				}
				err = otherTurnout.bindBoundaryKm(km, dp.Port())
				if err != nil {
					return err
				}
			}
		}
	}
	return nil
}

func buildCheckPointRelationShip(source *proto.Repository, repo *Repository) error {
	for _, protoData := range source.CheckPoints {
		cp := repo.checkPointMap[protoData.Id]
		isBoundary := protoData.Type == proto.CheckPointType_Boundary
		for _, protoDp := range protoData.DevicePorts {
			switch protoDp.DeviceType {
			case proto.DeviceType_DeviceType_PhysicalSection:
				section := repo.physicalSectionMap[protoDp.DeviceId]
				if isBoundary { //是区段边界
					err := section.bindBoundaryKm(cp.km, protoDp.Port)
					if err != nil {
						return err
					}
				} else {
					//检测点关联区段端口
					cp.bindDevicePort(&PhysicalSectionPort{
						section: section,
						port:    protoDp.Port,
					})
					//区段关联检测点
					section.bindDevices(cp)
					//如果区段边界未设置
					if section.findBoundaryKmByPort(protoDp.Port) == nil {
						if err := section.bindBoundaryKm(cp.km, protoDp.Port); err != nil {
							return err
						}
					}
				}
			case proto.DeviceType_DeviceType_Turnout:
				turnout := repo.turnoutMap[protoDp.DeviceId]
				if isBoundary { //是区段边界
					err := turnout.bindBoundaryKm(cp.km, protoDp.Port)
					if err != nil {
						return err
					}
				} else {
					//检测点关联道岔端口
					cp.bindDevicePort(&TurnoutPort{
						turnout: turnout,
						port:    protoDp.Port,
					})
					//道岔关联检测点
					turnout.bindDevice(cp, protoDp.Port)
					//如果区段边界未设置
					if turnout.findBoundaryKmByPort(protoDp.Port) == nil {
						if err := turnout.bindBoundaryKm(cp.km, protoDp.Port); err != nil {
							return err
						}
					}
				}
			}
		}
	}
	return nil
}

func buildResponderRelationShip(source *proto.Repository, repository *Repository) error {
	for _, protoData := range source.Transponders {
		responder := repository.responderMap[protoData.Id]
		//应答器和区段相互关联
		if protoData.SectionId != "" {
			interrelateResponderAndPhysicalSection(responder, repository.physicalSectionMap[protoData.SectionId])
		}
		//应答器和道岔相互关联
		tp := protoData.TurnoutPort
		if tp != nil {
			if tp.DeviceType != proto.DeviceType_DeviceType_Turnout {
				return fmt.Errorf("应答器[%s]关联的[%s-%s-%s]并非道岔端口", responder.Id(), tp.DeviceId, tp.DeviceType, tp.Port)
			}
			interrelateResponderAndTurnout(responder, repository.turnoutMap[tp.DeviceId], tp.Port)
		}
	}
	return nil
}

func buildSignalRelationShip(source *proto.Repository, repository *Repository) error {
	for _, protoData := range source.Signals {
		signal := repository.signalMap[protoData.Id]
		//信号机和区段相互关联
		if protoData.SectionId != "" {
			interrelateSignalAndPhysicalSection(signal, repository.physicalSectionMap[protoData.SectionId])
		}
		//信号机和道岔相互关联
		tp := protoData.TurnoutPort
		if tp != nil {
			if tp.DeviceType != proto.DeviceType_DeviceType_Turnout {
				return fmt.Errorf("信号机[%s]关联的[%s-%s-%s]并非道岔端口", signal.Id(), tp.DeviceId, tp.DeviceType, tp.Port)
			}
			interrelateSignalAndTurnout(signal, repository.turnoutMap[tp.DeviceId], tp.Port)
		}
		//关联继电器组
		for _, group := range protoData.ElectronicComponentGroups {
			var components []IGroupedElectronicComponent
			for _, id := range group.GetComponentIds() {
				if relay := repository.relayMap[id]; relay != nil {
					components = append(components, relay)
				}
			}
			signal.componentGroups = append(signal.componentGroups, &ElectronicComponentGroup{
				code:       group.Code,
				components: components,
			})
		}
	}
	return nil
}

func buildTurnoutRelationShip(source *proto.Repository, repo *Repository) error {
	for _, protoData := range source.Turnouts {
		turnout := repo.turnoutMap[protoData.Id]
		err := buildTurnoutPortRelation(repo, turnout, proto.Port_A, protoData.ADevicePort)
		if err != nil {
			return err
		}
		err = buildTurnoutPortRelation(repo, turnout, proto.Port_B, protoData.BDevicePort)
		if err != nil {
			return err
		}
		err = buildTurnoutPortRelation(repo, turnout, proto.Port_C, protoData.CDevicePort)
		if err != nil {
			return err
		}
		//关联继电器组
		for _, group := range protoData.ElectronicComponentGroups {
			var components []IGroupedElectronicComponent
			for _, id := range group.GetComponentIds() {
				if relay := repo.relayMap[id]; relay != nil {
					components = append(components, relay)
				} else if pfp := repo.phaseFailureProtectorMap[id]; pfp != nil {
					components = append(components, pfp)
				}
			}
			turnout.componentGroups = append(turnout.componentGroups, &ElectronicComponentGroup{
				code:       group.Code,
				components: components,
			})
		}
	}
	return nil
}

func buildTurnoutPortRelation(repo *Repository, turnout *Turnout, port proto.Port, protoDp *proto.DevicePort) error {
	model, err := repo.FindModel(protoDp.DeviceId, protoDp.DeviceType)
	if err != nil {
		return err
	}
	dp, err := buildDevicePort(model, protoDp.Port)
	if err != nil {
		return err
	}
	err = turnout.bindDevicePort(port, dp)
	return err
}

func buildPhysicalSectionRelationShip(source *proto.Repository, repository *Repository) error {
	for _, protoData := range source.PhysicalSections {
		section := repository.physicalSectionMap[protoData.Id]
		//A端关联
		if protoData.ADevicePort != nil {
			err := buildSectionPortRelation(repository, section, proto.Port_A, protoData.ADevicePort)
			if err != nil {
				return err
			}
		}
		//B端关联
		if protoData.BDevicePort != nil {
			err := buildSectionPortRelation(repository, section, proto.Port_B, protoData.BDevicePort)
			if err != nil {
				return err
			}
		}
		//道岔关联
		for _, turnoutId := range protoData.TurnoutIds {
			turnout := repository.turnoutMap[turnoutId]
			if turnout == nil {
				return fmt.Errorf("id[%s]的道岔不存在", turnoutId)
			}
			section.bindTurnouts(turnout)
			turnout.section = section
		}
	}
	return nil
}

// 构建物理区段指定端口的关联关系。区段{section}的{port}端口关联{protoDp}
func buildSectionPortRelation(repo *Repository, section *PhysicalSection, port proto.Port, protoDp *proto.DevicePort) error {
	model, err := repo.FindModel(protoDp.DeviceId, protoDp.DeviceType)
	if err != nil {
		return err
	}
	dp, err := buildDevicePort(model, protoDp.Port)
	if err != nil {
		return err
	}
	err = section.bindDevicePort(port, dp)
	if err != nil {
		return err
	}
	return nil
}

func buildDevicePort(device Identity, port proto.Port) (DevicePort, error) {
	var dp DevicePort
	switch device.Type() {
	case proto.DeviceType_DeviceType_PhysicalSection:
		section := device.(*PhysicalSection)
		dp = &PhysicalSectionPort{
			section: section,
			port:    port,
		}
	case proto.DeviceType_DeviceType_Turnout:
		turnout := device.(*Turnout)
		dp = &TurnoutPort{
			turnout: turnout,
			port:    port,
		}
	case proto.DeviceType_DeviceType_Link:
		link := device.(*Link)
		dp = &LinkPort{
			link: link,
			port: port,
		}
	default:
		return nil, fmt.Errorf("[%s]类型设备没有端口", device.Type())
	}
	return dp, nil
}

// 相互关联道岔和检测点
func interrelateTurnoutAndCheckPoints(turnout *Turnout, point *CheckPoint, port proto.Port) {
	turnout.bindDevice(point, port)
	point.bindDevicePort(&TurnoutPort{
		turnout: turnout,
		port:    port,
	})
}

// 相互关联物理区段和信号机
func interrelateSignalAndPhysicalSection(signal *Signal, section *PhysicalSection) {
	section.bindDevices(signal)
	//signal.bindSection(section)
}

// 相互关联信号机和道岔
func interrelateSignalAndTurnout(signal *Signal, turnout *Turnout, port proto.Port) {
	//signal.bindTurnoutPort(TurnoutPort{
	//	turnout: turnout,
	//	port:    port,
	//})
	turnout.bindDevice(signal, port)
}

// 相互关联应答器和物理区段
func interrelateResponderAndPhysicalSection(responder *Transponder, section *PhysicalSection) {
	//responder.bindSection(section)
	section.bindDevices(responder)
}

// 相互关联应答器和道岔
func interrelateResponderAndTurnout(responder *Transponder, turnout *Turnout, port proto.Port) {
	//responder.bindTurnoutPort(TurnoutPort{
	//	turnout: turnout,
	//	port:    port,
	//})
	turnout.bindDevice(responder, port)
}

func buildLinksAndRelate(repo *Repository) error {
	//构建link
	err := buildLinks(repo)
	if err != nil {
		return err
	}
	//Slope关联Link
	err = slopeRelateLink(repo)
	if err != nil {
		return err
	}
	//SectionalCurvature关联Link
	err = sectionalCurvatureRelateLink(repo)
	if err != nil {
		return err
	}
	return nil
}

func buildLinks(repo *Repository) error {
	visitedTurnoutPortMap := make(map[string]bool)
	allTurnouts := repo.TurnoutList()
	linkIdGenerator := 1
	for {
		//找一个未遍历过的道岔端口
		startTp := getATurnoutPort(allTurnouts, visitedTurnoutPortMap)
		if startTp == nil {
			break
		}
		//以始端道岔的公里标作为公里标换算的基准
		baseKm := startTp.turnout.km
		//创建基础Link
		link := &Link{
			Identity: identity{
				id:         strconv.Itoa(linkIdGenerator), //由于发给动力学的link的id是数字，所以这里也用数字
				deviceType: proto.DeviceType_DeviceType_Link,
			}}
		linkIdGenerator++
		//以此道岔端口作为Link的A端节点
		interrelateLinkAndTurnout(repo, baseKm, startTp, &LinkPort{link, proto.Port_A})
		//沿着道岔端口方向，一直寻找到轨道尽头或者下一个道岔端口。构建并关联中间的设备在link上的位置
		endTp, endKm, err := findEndTurnoutPortOrEndKm(repo, link, startTp, baseKm)
		if err != nil {
			return err
		}
		//以下一个道岔端口作为Link的B端节点
		if endTp != nil {
			visitedTurnoutPortMap[buildTurnoutPortKey(endTp)] = true
			endKm = endTp.turnout.km
			interrelateLinkAndTurnout(repo, baseKm, endTp, &LinkPort{link, proto.Port_B})
		} else {
			link.bindKm(endKm, proto.Port_B)
		}
		//计算Link长度
		convertedKm, err := convertKilometer(repo, endKm, baseKm.CoordinateSystem)
		if err != nil {
			return err
		}
		link.length = int64(math.Abs(float64(convertedKm.Value - baseKm.Value)))

		repo.linkMap[link.Id()] = link
	}
	return nil
}

func findEndTurnoutPortOrEndKm(repo *Repository, link *Link, startTp *TurnoutPort,
	baseKm *proto.Kilometer) (*TurnoutPort, *proto.Kilometer, error) {

	var endTp *TurnoutPort
	var endKm *proto.Kilometer
	var err error

	visitedModelMap := make(map[string]bool)
	var currentDp DevicePort = startTp
	devices := startTp.turnout.findDevicesByPort(startTp.port)
	for {
		//遍历设备并构建、关联其在Link上的位置
		err = relateDevicesAndLink(repo, link, baseKm, visitedModelMap, devices...)
		if err != nil {
			return nil, nil, err
		}
		//顺着端口寻找下一个设备端口
		var nextDp DevicePort
		switch currentDp.Device().Type() {
		case proto.DeviceType_DeviceType_PhysicalSection:
			section := currentDp.Device().(*PhysicalSection)
			relatePhysicalSectionAndLink(repo, section, link, baseKm)
			nextDp = section.findOtherDevicePort(currentDp.Port())
			if nextDp == nil {
				endKm = section.findOtherBoundaryKmByPort(currentDp.Port())
			}
		case proto.DeviceType_DeviceType_Turnout:
			turnout := currentDp.Device().(*Turnout)
			nextDp = turnout.findDevicePortByPort(currentDp.Port())
			if nextDp == nil {
				endKm = turnout.findBoundaryKmByPort(currentDp.Port())
			}
		}
		//根据下一个端口设备的信息决定是否结束循环
		if nextDp == nil {
			break
		}
		currentDp = nextDp
		var nextIsTp bool
		switch nextDp.Device().Type() {
		case proto.DeviceType_DeviceType_PhysicalSection:
			devices = nextDp.Device().(*PhysicalSection).devices
		case proto.DeviceType_DeviceType_Turnout:
			nextIsTp = true
			endTp = nextDp.(*TurnoutPort)
			devices = nextDp.Device().(*Turnout).findDevicesByPort(nextDp.Port())
			err = relateDevicesAndLink(repo, link, baseKm, visitedModelMap, devices...)
			if err != nil {
				return nil, nil, err
			}
		}
		if nextIsTp {
			break
		}
	}

	return endTp, endKm, err
}

func relatePhysicalSectionAndLink(repo *Repository, section *PhysicalSection, link *Link, baseKm *proto.Kilometer) {
	link.bindPhysicalSections(section)
	aKm, _ := convertKilometer(repo, section.aKm, baseKm.CoordinateSystem)
	bKm, _ := convertKilometer(repo, section.bKm, baseKm.CoordinateSystem)
	aOffset := number.Abs(aKm.Value - baseKm.Value)
	bOffset := number.Abs(bKm.Value - baseKm.Value)
	section.aLinkPosition = &LinkPosition{
		link:   link,
		offset: aOffset,
	}
	section.bLinkPosition = &LinkPosition{
		link:   link,
		offset: bOffset,
	}
	if aOffset <= bOffset {
		section.startLinkPosition = section.aLinkPosition
		section.endLinkPosition = section.bLinkPosition
	} else {
		section.startLinkPosition = section.bLinkPosition
		section.endLinkPosition = section.aLinkPosition
	}
}

func getATurnoutPort(turnouts []*Turnout, visitedTurnoutMap map[string]bool) *TurnoutPort {
	portSlice := []proto.Port{proto.Port_A, proto.Port_B, proto.Port_C}
	for _, turnout := range turnouts {
		for _, port := range portSlice {
			tp := &TurnoutPort{
				turnout: turnout,
				port:    port,
			}
			key := buildTurnoutPortKey(tp)
			if !visitedTurnoutMap[key] {
				visitedTurnoutMap[key] = true
				return tp
			}
		}
	}
	return nil
}

func buildTurnoutPortKey(tp *TurnoutPort) string {
	return fmt.Sprintf("%s-%s", tp.turnout.Id(), tp.port)
}

func relateDevicesAndLink(repo *Repository, link *Link, startKm *proto.Kilometer, visitedModelMap map[string]bool, devices ...Identity) error {
	for _, device := range devices {
		if visitedModelMap[device.Id()] {
			continue
		}
		km := findModelKm(device)
		if km == nil || km.CoordinateSystem == "" {
			continue
		}
		convertedKm, err := convertKilometer(repo, km, startKm.CoordinateSystem)
		if err != nil {
			return err
		}
		offset := int64(math.Abs(float64(convertedKm.Value - startKm.Value)))
		linkPosition := &LinkPosition{
			link:   link,
			offset: offset,
		}
		switch device.Type() {
		case proto.DeviceType_DeviceType_CheckPoint:
			device.(*CheckPoint).bindLinkPosition(linkPosition)
		case proto.DeviceType_DeviceType_Signal:
			device.(*Signal).bindLinkPosition(linkPosition)
		case proto.DeviceType_DeviceType_Transponder:
			device.(*Transponder).bindLinkPosition(linkPosition)
		}
	}
	return nil
}

func interrelateLinkAndTurnout(repo *Repository, baseKm *proto.Kilometer, tp *TurnoutPort, linkPort *LinkPort) {
	tp.turnout.bindLinkPort(tp.port, linkPort)
	linkPort.link.bindTurnoutPort(linkPort.port, tp)
	tpKm := tp.turnout.findBoundaryKmByPort(tp.port)
	tpKm, _ = convertKilometer(repo, tpKm, baseKm.CoordinateSystem)
	offset := number.Abs(tpKm.Value - baseKm.Value)
	tp.turnout.bindLinkPosition(tp.port, &LinkPosition{
		link:   linkPort.link,
		offset: offset,
	})
}

func findModelKm(model Identity) *proto.Kilometer {
	switch model.Type() {
	case proto.DeviceType_DeviceType_Signal:
		return model.(*Signal).km
	case proto.DeviceType_DeviceType_Transponder:
		return model.(*Transponder).km
	case proto.DeviceType_DeviceType_CheckPoint:
		return model.(*CheckPoint).km
	case proto.DeviceType_DeviceType_Turnout:
		return model.(*Turnout).km
	}
	return nil
}

func slopeRelateLink(repo *Repository) error {
	slopeMap := repo.slopeMap
	for _, slope := range slopeMap {
		start, end, err := calculateLinkSegment(repo, slope.kms[0], slope.kms[1])
		if err != nil {
			return err
		}
		slope.bindStartLinkPosition(start)
		slope.bindEndLinkPosition(end)
	}
	return nil
}

func calculateLinkSegment(repo *Repository, startKm *proto.Kilometer,
	endKm *proto.Kilometer) (*LinkPosition, *LinkPosition, error) {

	endKm, err := convertKilometer(repo, endKm, startKm.CoordinateSystem)
	if err != nil {
		return nil, nil, err
	}
	var start *LinkPosition
	var end *LinkPosition
	var minKmValue float64
	var minKmLink *Link
	var maxKmValue float64
	var maxKmLink *Link
	for _, link := range repo.linkMap {
		//将link两端的公里标转为aKm同坐标系的公里标
		linkAKm := link.aKm
		linkBKm := link.bKm
		if linkAKm.CoordinateSystem != startKm.CoordinateSystem || linkAKm.Direction != startKm.Direction {
			continue
		}
		if linkBKm.CoordinateSystem != startKm.CoordinateSystem || linkBKm.Direction != startKm.Direction {
			continue
		}
		//记录公里标最小/最大的Link
		newMinKmValue := math.Min(float64(linkAKm.Value), float64(linkBKm.Value))
		newMaxKmValue := math.Max(float64(linkAKm.Value), float64(linkBKm.Value))
		if minKmLink == nil || newMinKmValue < minKmValue {
			minKmValue = newMinKmValue
			minKmLink = link
		}
		if maxKmLink == nil || newMaxKmValue > maxKmValue {
			maxKmValue = newMaxKmValue
			maxKmLink = link
		}
		//若start/end公里标落在link上，构建LinkPosition
		if number.IsBetween(startKm.Value, linkAKm.Value, linkBKm.Value) {
			start = &LinkPosition{
				link:   link,
				offset: int64(math.Abs(float64(startKm.Value - linkAKm.Value))),
			}
		}
		if number.IsBetween(endKm.Value, linkAKm.Value, linkBKm.Value) {
			end = &LinkPosition{
				link:   link,
				offset: int64(math.Abs(float64(endKm.Value - linkAKm.Value))),
			}
		}
		if start != nil && end != nil {
			break
		}
	}
	//处理start/end公里标没落在Link上的情况
	if start == nil {
		if startKm.Value < endKm.Value {
			offset, _ := minKmLink.findEndOffset()
			start = &LinkPosition{
				link:   minKmLink,
				offset: offset,
			}
		} else {
			offset, _ := maxKmLink.findEndOffset()
			start = &LinkPosition{
				link:   maxKmLink,
				offset: offset,
			}
		}
	}
	if end == nil {
		if endKm.Value < startKm.Value {
			offset, _ := minKmLink.findEndOffset()
			end = &LinkPosition{
				link:   minKmLink,
				offset: offset,
			}
		} else {
			offset, _ := maxKmLink.findEndOffset()
			end = &LinkPosition{
				link:   maxKmLink,
				offset: offset,
			}
		}
	}

	return start, end, nil
}

func sectionalCurvatureRelateLink(repo *Repository) error {
	for _, curvature := range repo.sectionalCurvatureMap {
		start, end, err := calculateLinkSegment(repo, curvature.kms[0], curvature.kms[1])
		if err != nil {
			return err
		}
		curvature.bindStartLinkPosition(start)
		curvature.bindEndLinkPosition(end)
	}
	return nil
}

func buildStationRelationShip(source *proto.Repository, repo *Repository) error {
	for _, protoData := range source.Stations {
		station, ok := repo.stationMap[protoData.Id]
		if !ok {
			return fmt.Errorf("缺失车站[%s]", protoData.Id)
		}
		if len(protoData.ElectronicGroup) == 0 {
			continue
		}
		for _, ref := range protoData.ElectronicGroup {
			switch ref.Code {
			case "EMP":
				bindIbpDevice(repo, ref.Components, station.GetIbpEmp())
			case "SPKS":
				bindIbpDevice(repo, ref.Components, station.GetIbpSpk())
			default:
				slog.Warn("车站实体未实现【%s】绑定逻辑", ref.Code)
			}
		}
	}
	return nil
}

// 将设备绑入IBP
func bindIbpDevice(repo *Repository, comps []*proto.ElectronicComponent, refMap *IBPRefMap) {
	for _, data := range comps {
		switch data.DeviceType {
		case proto.DeviceType_DeviceType_Alarm:
			refMap.AddAlarm(repo.alarmMap[data.Id])
		case proto.DeviceType_DeviceType_Button:
			refMap.AddButton(repo.buttonMap[data.Id])
		case proto.DeviceType_DeviceType_Relay:
			refMap.AddRelay(repo.relayMap[data.Id])
		case proto.DeviceType_DeviceType_Light:
			refMap.AddLight(repo.lightMap[data.Id])
		default:
			slog.Warn("IBP未绑定【%s】类型设备", data.DeviceType.String())
		}
	}
}