package repository

import "joylink.club/rtsssimulation/repository/model/proto"

// ISCS模型仓库构建
func buildIscsModels(source *proto.Repository, repository *Repository) error {
	//ISCS管线
	for _, protoData := range source.Pipes {
		m := NewPipe(protoData.Id, protoData.Code, protoData.PipeType)
		repository.PipeMap[m.Id()] = m
	}
	//ISCS管件
	for _, protoData := range source.PipeFittings {
		m := NewPipeFitting(protoData.Id, protoData.Code, int8(protoData.Sum))
		repository.PipeFittingMap[m.Id()] = m
	}
	//ISCS断路器
	for _, protoData := range source.CircuitBreakers {
		m := NewCircuitBreaker(protoData.Id, protoData.Code)
		repository.CircuitBreakerMap[m.Id()] = m
	}
	//ISCS三工位开关
	for _, protoData := range source.ThreePositionSwitches {
		m := NewThreePositionSwitch(protoData.Id, protoData.Code)
		repository.ThreePositionSwitchMap[m.Id()] = m
	}
	//ISCS手车
	for _, protoData := range source.HandcartSwitches {
		m := NewHandcartSwitch(protoData.Id, protoData.Code)
		repository.HandcartSwitchMap[m.Id()] = m
	}
	//ISCS整流器
	for _, protoData := range source.Rectifiers {
		m := NewRectifier(protoData.Id, protoData.Code)
		repository.RectifierMap[m.Id()] = m
	}
	//ISCS隔离开关
	for _, protoData := range source.Disconnectors {
		m := NewDisconnector(protoData.Id, protoData.Code)
		repository.DisconnectorMap[m.Id()] = m
	}
	//ISCS变压器
	for _, protoData := range source.VoltageTransformers {
		m := NewVoltageTransformer(protoData.Id, protoData.Code, protoData.E1, protoData.E2)
		repository.VoltageTransformerMap[m.Id()] = m
	}
	//ISCS电源
	for _, protoData := range source.PowerSources {
		m := NewPowerSource(protoData.Id, protoData.Code, protoData.Ac, protoData.Voltage)
		repository.PowerSourceMap[m.Id()] = m
	}
	//ISCS避雷器
	for _, protoData := range source.LightningArresters {
		m := NewLightningArrester(protoData.Id, protoData.Code)
		repository.LightningArresterMap[m.Id()] = m
	}
	//ISCS接地装置
	for _, protoData := range source.EarthingDevices {
		m := NewEarthingDevice(protoData.Id, protoData.Code)
		repository.EarthingDeviceMap[m.Id()] = m
	}
	//ISCS网络交换机
	for _, protoData := range source.NetworkSwitches {
		m := NewNetworkSwitch(protoData.Id, protoData.Code)
		repository.NetworkSwitchMap[m.Id()] = m
	}
	//ISCS线柜
	for _, protoData := range source.WireCabinets {
		m := NewWireCabinet(protoData.Id, protoData.Code)
		repository.WireCabinetMap[m.Id()] = m
	}
	//ISCS风亭
	for _, protoData := range source.AirPavilions {
		m := NewAirPavilion(protoData.Id, protoData.Code, protoData.PavilionType)
		repository.AirPavilionMap[m.Id()] = m
	}
	//ISCS阀门
	for _, protoData := range source.Valves {
		m := NewValve(protoData.Id, protoData.Code, protoData.ValveType)
		repository.ValveMap[m.Id()] = m
	}
	//ISCS 混合室静压箱
	for _, protoData := range source.GasMixingChambers {
		m := NewGasMixingChamber(protoData.Id, protoData.Code)
		repository.GasMixingChamberMap[m.Id()] = m
	}
	//ISCS组合式空调
	for _, protoData := range source.CombinationAirConditioners {
		m := NewCombinationAirConditioner(protoData.Id, protoData.Code)
		repository.CombinationAirConditionerMap[m.Id()] = m
	}
	//ISCS净化装置
	for _, protoData := range source.AirPurificationDevices {
		m := NewAirPurificationDevice(protoData.Id, protoData.Code)
		repository.AirPurificationDeviceMap[m.Id()] = m
	}
	//ISCS空气幕
	for _, protoData := range source.AirCurtains {
		m := NewAirCurtain(protoData.Id, protoData.Code)
		repository.AirCurtainMap[m.Id()] = m
	}
	//ISCS风机
	for _, protoData := range source.Fans {
		m := NewFan(protoData.Id, protoData.Code)
		repository.FanMap[m.Id()] = m
	}
	//ISCS气体环境
	for _, protoData := range source.GasEnvironments {
		m := NewGasEnvironment(protoData.Id, protoData.Code)
		repository.GasEnvironmentMap[m.Id()] = m
	}
	//
	return nil
}

// ISCS模型关系构建
func buildIscsModelRelationship(source *proto.Repository, repository *Repository) error {
	if e := buildIscsPipeModelRelationship(source, repository); e != nil {
		return e
	}
	//
	return nil
}

// ISCS模型关系构建---构建与管线Pipe相关的关系
func buildIscsPipeModelRelationship(source *proto.Repository, repository *Repository) error {
	//PSCADA一次图关系数据都在proto管线中
	for _, protoPipe := range source.Pipes {
		pipeA := protoPipe.PortA
		pipeB := protoPipe.PortB
		pipeModel := (repository.FindById(source.Id)).(*Pipe)
		//pipeModel的端口pipePort连接设备的端口portRelatedDevice
		buildRelationship := func(pipePort proto.Port, portRelatedDevice *proto.DevicePort) error {
			relatedDevice, e := repository.FindModel(portRelatedDevice.DeviceId, portRelatedDevice.DeviceType)
			if e != nil {
				return e
			}
			var pipePortRelatedDevice DevicePort
			switch portRelatedDevice.DeviceType {
			case proto.DeviceType_DeviceType_AirPavilion: //管线关联风亭
				{
					airPavilion := relatedDevice.(*AirPavilion)
					pipePortRelatedDevice = &AirPavilionPort{port: portRelatedDevice.Port, device: airPavilion}
					airPavilion.PortA = &PipePort{port: pipePort, pipe: pipeModel}
				}
			case proto.DeviceType_DeviceType_Valve: //管线关联风阀
				{
					valve := relatedDevice.(*Valve)
					pipePortRelatedDevice = &ValvePort{port: portRelatedDevice.Port, device: valve}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						valve.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						valve.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_GasMixingChamber:
				{
					gasMixingChamber := relatedDevice.(*GasMixingChamber)
					pipePortRelatedDevice = &GasMixingChamberPort{port: portRelatedDevice.Port, device: gasMixingChamber}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						gasMixingChamber.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						gasMixingChamber.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_C:
						gasMixingChamber.PortC = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_D:
						gasMixingChamber.PortD = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_CombinationAirConditioner:
				{
					combinationAirConditioner := relatedDevice.(*CombinationAirConditioner)
					pipePortRelatedDevice = &CombinationAirConditionerPort{port: portRelatedDevice.Port, device: combinationAirConditioner}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						combinationAirConditioner.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						combinationAirConditioner.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_C:
						combinationAirConditioner.PortC = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_D:
						combinationAirConditioner.PortD = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_AirPurificationDevice:
				{
					airPurificationDevice := relatedDevice.(*AirPurificationDevice)
					pipePortRelatedDevice = &AirPurificationDevicePort{port: portRelatedDevice.Port, device: airPurificationDevice}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						airPurificationDevice.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						airPurificationDevice.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_Fan:
				{
					fan := relatedDevice.(*Fan)
					pipePortRelatedDevice = &FanPort{port: portRelatedDevice.Port, device: fan}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						fan.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						fan.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_GasEnvironment:
				{
					gasEnvironment := relatedDevice.(*GasEnvironment)
					pipePortRelatedDevice = &GasEnvironmentPort{port: portRelatedDevice.Port, device: gasEnvironment}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						gasEnvironment.PortsA = append(gasEnvironment.PortsA, &PipePort{port: pipePort, pipe: pipeModel})
					case proto.Port_B:
						gasEnvironment.PortsB = append(gasEnvironment.PortsB, &PipePort{port: pipePort, pipe: pipeModel})
					}
				}
			case proto.DeviceType_DeviceType_PipeFitting:
				{
					pipeFitting := relatedDevice.(*PipeFitting)
					pipePortRelatedDevice = &PipeFittingPort{port: portRelatedDevice.Port, pipeFitting: pipeFitting}
					//构建管件pipeFitting与管线的关系
					switch portRelatedDevice.Port {
					case proto.Port_A:
						pipeFitting.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						pipeFitting.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_C:
						pipeFitting.PortC = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_D:
						pipeFitting.PortD = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_CircuitBreaker:
				{
					circuitBreaker := relatedDevice.(*CircuitBreaker)
					pipePortRelatedDevice = &CircuitBreakerPort{port: portRelatedDevice.Port, breaker: circuitBreaker}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						circuitBreaker.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						circuitBreaker.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_LightningArrester:
				{
					lightningArrester := relatedDevice.(*LightningArrester)
					pipePortRelatedDevice = &LightningArresterPort{port: portRelatedDevice.Port, arrester: lightningArrester}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						lightningArrester.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						lightningArrester.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_ThreePositionSwitch:
				{
					tps := relatedDevice.(*ThreePositionSwitch)
					pipePortRelatedDevice = &ThreePositionSwitchPort{port: portRelatedDevice.Port, breaker: tps}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						tps.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						tps.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_C:
						tps.PortC = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_HandcartSwitch:
				{
					hs := relatedDevice.(*HandcartSwitch)
					pipePortRelatedDevice = &HandcartSwitchPort{port: portRelatedDevice.Port, breaker: hs}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						hs.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						hs.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_Rectifier:
				{
					rectifier := relatedDevice.(*Rectifier)
					pipePortRelatedDevice = &RectifierPort{port: portRelatedDevice.Port, rectifier: rectifier}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						rectifier.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						rectifier.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_C:
						rectifier.PortC = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_D:
						rectifier.PortD = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_Disconnector:
				{
					disconnecter := relatedDevice.(*Disconnector)
					pipePortRelatedDevice = &DisconnectorPort{port: portRelatedDevice.Port, breaker: disconnecter}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						disconnecter.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						disconnecter.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_VoltageTransformer:
				{
					vt := relatedDevice.(*VoltageTransformer)
					pipePortRelatedDevice = &VoltageTransformerPort{port: portRelatedDevice.Port, vt: vt}
					switch portRelatedDevice.Port {
					case proto.Port_A:
						vt.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_B:
						vt.PortB = &PipePort{port: pipePort, pipe: pipeModel}
					case proto.Port_C:
						vt.PortC = &PipePort{port: pipePort, pipe: pipeModel}
					}
				}
			case proto.DeviceType_DeviceType_PowerSource:
				{
					ps := relatedDevice.(*PowerSource)
					pipePortRelatedDevice = &PowerSourcePort{ps: ps}
					ps.PortA = &PipePort{port: pipePort, pipe: pipeModel}
				}
			case proto.DeviceType_DeviceType_EarthingDevice:
				{
					ed := relatedDevice.(*EarthingDevice)
					ed.PortA = &PipePort{port: pipePort, pipe: pipeModel}
					pipePortRelatedDevice = &EarthingDevicePort{ed: ed}
				}
			}
			if pipePortRelatedDevice != nil {
				if pipePort == proto.Port_A {
					pipeModel.PortA = pipePortRelatedDevice
				} else {
					pipeModel.PortB = pipePortRelatedDevice
				}
			}
			//
			return nil
		}
		//
		if pipeA != nil {
			if e := buildRelationship(proto.Port_A, pipeA); e != nil {
				return e
			}
		}
		if pipeB != nil {
			if e := buildRelationship(proto.Port_B, pipeB); e != nil {
				return e
			}
		}
	}
	//
	return nil
}