rts-sim-testing-message/protos/request.proto

syntax = "proto3";

package request;
option go_package = "joylink.club/bj-rtsts-server/dto/request_proto";
/*
message BypassOperationReq{
  enum Operation{
    bypass = 0;  //旁路
    bypass_reset = 1; // 旁路重置
  }
  enum BtnType{
      esb_btn = 0;
      ibp_btn = 1;
      ibp_key = 2;
      pls_btn = 3;
  }
  string simulationId = 1;         // 仿真id
  int32 mapId = 2;                 // 图id
  uint32 deviceId = 3;             // 设备id
  string deviceCode = 5;//设备code
  uint32 stationId = 6; //车站id
  uint32 gateBoxId = 7;
  BypassOperationReq.Operation operation = 8;
    BypassOperationReq.BtnType btnType = 9;
}
*/

// 继电器
message Relay {
  // 继电器操作
  enum Operation {
    Undefined = 0; // 未定义
    ForceQw = 1;   // 强制前接点位(吸起)
    ForceHw = 2;   // 强制后接点位(落下)
    CancelForce = 3; // 取消强制
  }
}

// 继电器操作请求
message RelayOperationReq {
  string simulationId = 1;         // 仿真id
  int32 mapId = 2;                 // 图id
  uint32 deviceId = 3;             // 设备id
  Relay.Operation operation = 4;   // 继电器操作
}

// 道岔
message Points {
  // 道岔操作
  enum Operation {
    Undefined = 0; // 未定义
    SetParams = 1; // 设置参数
  }
  // 道岔强制
  enum Force {
    FP_NONE = 0; // 无强制
    FP_DW = 1;   // 定位
    FP_FW = 2;   // 反位
    FP_SB = 3;  // 失表
  }
}

// 道岔操作请求
message PointsOperationReq {
  string simulationId = 1;         // 仿真id
  int32 mapId = 2;                 // 图id
  uint32 deviceId = 3;             // 设备id
  Points.Operation operation = 4; // 道岔操作
  PointsParam param = 5; // 道岔参数,当operation为SetParams时有效
}

// 道岔参数
message PointsParam {
  Points.Force forcePosition = 1; // 道岔强制
}

// 信号机
message Signal {
  //信号机操作
  enum Operation {
    Undefined = 0;       // 未定义
    SetParams = 1; // 设置参数
    // Display = 1;         //显示操作,如设置绿色、设置红黄色
    // LightHFaultDs = 2;   //设置红灯断丝故障
    // LightUFaultDs = 3;   //设置黄灯断丝故障
    // LightLFaultDs = 4;   //设置绿灯断丝故障
    // LightAFaultDs = 5;   //设置蓝灯断丝故障
    // LightBFaultDs = 6;   //设置白灯断丝故障
    // LightHCancelDs = 7;  //取消红灯断丝故障
    // LightUCancelDs = 8;  //取消黄灯断丝故障
    // LightLCancelDs = 9;  //取消绿灯断丝故障
    // LightACancelDs = 10; //取消蓝灯断丝故障
    // LightBCancelDs = 11; //取消白灯断丝故障
  }
  enum DS {
    DS_H = 0; // 红灯断丝
    DS_U = 1; // 黄灯断丝
    DS_L = 2; // 绿灯断丝
    DS_A = 3; // 蓝灯断丝
    DS_B = 4; // 白灯断丝
  }
  // 信号机强制
  enum Force {
    SF_NONE = 0; // 无强制
    SF_M = 1; // 灭灯
    SF_H = 2;  // 红灯
    SF_U = 3; // 黄灯
    SF_L = 4; // 绿灯
    SF_HU = 5; // 红黄灯
    SF_A = 6; // 蓝灯
    SF_B = 7; // 白灯
  }
}

message SignalOperationReq {
  string simulationId = 1;         // 仿真id
  int32 mapId = 2;                 // 图id
  uint32 deviceId = 3;             // 设备id
  Signal.Operation operation = 4; // 信号机操作
  SignalParam param = 5; // 信号机参数,当operation为SetParams时有效
}

message SignalParam {
  Signal.Force force = 1; // 信号机强制
  repeated Signal.DS dsList = 2; // 信号机断丝
}

// 区段
message Section {
  //区段操作
  enum Operation {
    Undefined = 0; // 未定义
    SetParams = 1; // 设置参数
    // SetDrst = 0;//设置计轴直接复位
    // CancelDrst = 1;//取消计轴直接复位
    // SetPdrst = 2;//设置计轴预复位
    // CancelPdrst = 3;//取消计轴预复位
    SetFaultOcc = 4;    //设置故障占用
    // CancelFaultOcc = 5; //取消故障占用
  }
}

message SectionOperationReq {
  string simulationId = 1;         // 仿真id
  int32 mapId = 2;                 // 图id
  uint32 deviceId = 3;             // 设备id
  Section.Operation operation = 4; // 区段操作
  SectionParam param = 5;          // 区段参数,当operation为SetParams时有效
}

message SectionParam {
  // bool faultOcc = 1; // 故障占用
  bool mockDrst = 2; // 模拟CI计轴复位(临时)
  bool mockPdrst = 3; // 模拟CI计轴预复位(临时)
}

//屏蔽门
message Psd {
  enum Operation {
    Undefined = 0;
    SetParams = 1; // 设置参数
  }
  enum Force {
    F_NONE = 0; //无强制
    F_ASD_KM = 1; //滑动门强制开门
    F_ASD_GM = 2; //滑动门强制关门
  }
  enum Fault {
    FA_NONE = 0; //无故障
    FA_Obstacle = 1; //设置故障物
  }
}

// 屏蔽门操作请求
message PsdOperationReq {
  string simulationId = 1;         // 仿真id
  int32 mapId = 2;                 // 图id
  uint32 deviceId = 3;             // 设备id
  Psd.Operation operation = 4; // 操作
  PsdParam param = 5; // 屏蔽门参数,当operation为SetParams时有效
}

message PsdParam {
  repeated int32 asdCodes = 1; // 涉及的滑动门的编号
  Psd.Force force = 2; // 屏蔽门强制设置
  Psd.Fault fault = 3; // 屏蔽门故障设置
}

//列车控制
message TrainControl{
  string simulationId = 1;         // 仿真id
  string trainId = 2;
  uint32 deviceId = 3;//设备id
  TrainControlType controlType = 4;
  EmergentButton button = 5;// 紧急制动
  DriverKeySwitch driverKey = 6;
  DirectionKeySwitch dirKey = 7; //方向
  PushHandler handler = 8; //手柄
  enum TrainControlType{
    EMERGENT_BUTTON = 0; // 摁钮
    DRIVER_KEY_SWITCH = 1; //驾驶端钥匙
    DIRECTION_KEY_SWITCH = 2;//方向钥匙
    HANDLER = 3; //手柄
  }

  //紧急制动
  message EmergentButton{
    bool active = 1;
  }

  //驾驶
  message DriverKeySwitch{
      bool val = 1;  //0=关，1=开


  }
  message  DirectionKeySwitch{
    uint32 val = 1;  //0=后，1=前,2=中位
  }
  //牵引或制动手柄
  message PushHandler{
    int32 val = 1; // 牵引或制动 大于0是牵引，小于0是制动 整体按照整型传输(*100)，使用时除以100
  }

}



message CkmOperationReq {
  string simulationId = 1;
  int32 mapId = 2;
  uint32 deviceId = 3; //设备id（车库门id）
  Ckm.Operation operation = 4; //车库门操作
  CkmParam param = 5; //车库门参数，在operation为SetParams时有效
}

message Ckm {
  enum Operation {
    Undefined= 0;
    SetParams = 1;
  }
  enum Force {
    F_NONE = 0; //无强制
    F_KM = 1; //强制开门
    F_GM = 2; //强制关门
  }
  enum Fault {
    FA_NONE = 0; //无故障
    FA_State_Loss = 1; //状态丢失
  }
}

message CkmParam {
  Ckm.Force force = 1;
  Ckm.Fault fault = 2;
}

message XcjOperationReq {
  string simulationId = 1;
  int32 mapId = 2;
  uint32 deviceId = 3; //设备id（洗车机id）
  Xcj.Operation operation = 4;
  XcjParam param = 5; //洗车机参数，在operation为SetParams时有效
}

message Xcj {
  enum Operation {
    Undefined= 0;
    SetParams = 1;
  }
  enum Fault {
    FA_NONE = 0; //无故障
    FA_Fault = 1; //故障
  }
}

message XcjParam {
  Xcj.Fault fault = 1;
}