rts-sim-testing-message/protos/stationLayoutGraphics.proto

syntax = "proto3";


package graphicData;
import "common_data.proto";
option java_package = "club.joylink.bjrtss.ats.verify.protos";
option java_outer_classname = "LayoutGraphicsProto";
option go_package = "joylink.club/bj-rtsts-server/dto/data_proto";

message RtssGraphicStorage {
  Canvas canvas = 1;
  // repeated Link links = 2;
  // repeated IscsFan iscsFans = 3;
  repeated Platform Platforms = 4;
  repeated Station stations = 5;
  // repeated Rect rects = 6;
  repeated Train train = 7;
  repeated Signal signals = 8;
  repeated Turnout turnouts = 9;
  repeated Section section = 10;
  repeated Polygon polygons = 11;
  repeated TrainWindow trainWindows = 12;
  repeated AxleCounting axleCountings = 13;
  repeated Separator separators = 14;
  repeated SectionLink sectionLinks = 15;
  repeated AxleCountingSection axleCountingSections = 16;
  repeated LogicSection logicSections = 17;
  repeated StopPosition stopPositions = 18;
  repeated SpksSwitch spksSwitchs = 19;
  repeated EsbButton esbButtons = 20; // 紧急关闭按钮
  repeated GatedBox gateBoxs = 21; // 站台开门/关门/发车按钮整合控制箱
  repeated Transponder transponders = 22;                // 应答器
  repeated Slope slopes = 23;                            // 坡度
  // repeated CalculateLink CalculateLink = 24;             // 计算link信息
  repeated SlopeKiloMarker slopeKiloMarker = 25;         //坡度公里标
  repeated CurvatureKiloMarker curvatureKiloMarker = 26; //曲度公里标
  repeated Curvature curvatures = 27;                    // 曲度
  repeated TrackSection trackSections = 28;              //轨道区段
  repeated TrackLogicSection trackLogicSections = 29;    //轨道逻辑区段
  //UniqueIdType UniqueIdPrefix = 30;//设备唯一编码--前缀
  UniqueIdOfStationLayout UniqueIdPrefix = 31;//设备唯一编码--前缀
  repeated KilometerConvert kilometerConvertList = 32;//公里标转换列表
  repeated ScreenDoor screenDoors = 33;
  repeated StationRelateDevice stationRelateDeviceList = 34; // 关联设备列表
  repeated SectionCodePoint sectionCodePointList = 35; // 物理区段码位表
  ScreenDoorConfig screenDoorConfig = 36;//屏蔽门的配置--子屏蔽门的数量和编组列表
  repeated Beacon beacons = 37; // 信标
  GenerateAxleCountingConfig generateAxleCountingConfig = 38;//一键生成计轴的配置
  repeated DepartureTimer departureTimers = 39; // 发车计时器
  repeated AutoReturnBox autoReturnBoxs = 40; // 自动折返按钮箱
  repeated ConcentrationDividingLine concentrationDividingLines = 41; // 集中区分割线
  repeated OtherLine otherLineList = 42; // 其他线设备列表
  repeated IbpBox ibpBoxs = 43; // ibp地图打开按钮
  repeated PslBox pslBoxs = 44; // psl地图打开按钮
}

message Canvas {
  // 画布宽
  int32 width = 1;
  // 画布高
  int32 height = 2;
  // 背景色
  string backgroundColor = 3;
  // 视口变换
  Transform viewportTransform = 4;
}

message Point {
  // x坐标
  float x = 1;
  // y坐标
  float y = 2;
}

//变换
message Transform {
  // 位移
  Point position = 1;
  // 缩放
  Point scale = 2;
  // 旋转弧度
  float rotation = 3;
  // 歪斜
  Point skew = 4;
}

//子元素变换
message ChildTransform {
  // 子元素名称
  string name = 1;
  // 子元素变换
  Transform transform = 2;
}
// 公共属性
message CommonInfo {
  string oldid = 1;
  string graphicType = 2;
  Transform transform = 3;
  repeated ChildTransform childTransforms = 4;
  uint32 id = 5;
}

// message Link {
//   CommonInfo common = 1;
//   string code = 2;
//   bool curve = 3;            // 是否曲线
//   int32 segmentsCount = 4;   // 曲线分段数
//   int32 lineWidth = 5;       // 线宽
//   string lineColor = 6;      // 线色
//   repeated Point points = 7; // 点坐标列表
// }

// message Rect {
//   CommonInfo common = 1;
//   string code = 2;
//   int32 lineWidth = 3;  // 线宽
//   string lineColor = 4; // 线色
//   float width = 5;      //宽度
//   float height = 6;     //高度
//   int32 radius = 7;     //圆角半径
//   Point point = 8;      // 画第一个点的坐标
// }

message Polygon {
  enum PolygonType {
    ConcentrationDividingLine = 0;
  }
  CommonInfo common = 1;
  string code = 2;           // 编号
  PolygonType polygonType = 3; // 多边形类型
  repeated Point points = 4; // 点列表
}

message ConcentrationDividingLine {
  CommonInfo common = 1;
  string code = 2;           // 编号
  repeated Point points = 3; // 点列表
  string oldrefLeftStationId = 4;//左边关联的集中站id
  string oldrefRightStationId = 5;//右边关联的集中站id
  repeated NodeConWithSec nodeConWithSecs = 6;// 集中区分割线与区段的交点
  bool isOtherLineConcentrationDividingLine = 7;//集中区分割线绘制在其它线的边界处
  uint32 refLeftStationId = 8;//左边关联的集中站id
  uint32 refRightStationId = 9;//右边关联的集中站id
}

message NodeConWithSec {
 RelatedRef leftSection = 1;
 RelatedRef rightSection = 2;
}

message Platform {
  enum TypeOfPlatform {
    Unknown = 0;
    up = 1;
    down = 2;
  }
  CommonInfo common = 1;
  string code = 2;
  //bool hasdoor = 3;          // 是否有屏蔽门
  //string direction = 4;      // 屏蔽门上下
  // int32 index = 5;           //索引
  //int32 refStationIndex = 6; //关联车站索引
  // repeated string centralizedStations = 7; // 集中站列表
  //repeated RelatedRef platformRef = 8; //站台关联的车站和物理区段
  string oldrefStationId = 9; //关联的车站的id
  string oldrefSectionId = 10; //关联的物理区段id
  string refEsbRelayCode = 11;//关联的紧急停车继电器的编号
  TypeOfPlatform type = 12; //站台的上下行
  uint32 refStationId = 13; //关联的车站的id
  uint32 refSectionId = 14; //关联的物理区段id
}

message ScreenDoor {
  CommonInfo common = 1;
  string code = 2;
  //int32 sonDoorAmount = 3; //子屏蔽门的数量
  string oldrefPlatformId = 4; //关联的站台
  //repeated ScreenDoorGroup screenDoorGroupList = 5;//编组列表
  uint32 refPlatformId = 6; //关联的站台
}

message ScreenDoorConfig {
  int32 sonDoorAmount = 1; //子屏蔽门的数量
  repeated ScreenDoorGroup screenDoorGroupList = 2;//编组列表
}

message ScreenDoorGroup {
  int32 trainGroupAmount = 1; //列车编组数量
  int32 startSmallDoor = 2; //起始的屏蔽门编号
  int32 endSmallDoor = 3; //结束的屏蔽门编号
}

message Station {
  CommonInfo common = 1;
  string code = 2;//车站站名
  // bool hasControl = 3;            // 是否有控制
  bool concentrationStations = 4; //是否集中站
  // string kilometerCode = 5;       //公里标
  KilometerSystem kilometerSystem = 6; //公里标
  // int32 index = 7;
  string refIbpMapCode = 8; // 关联IBP地图Code
  string stationName = 9; //车站名
  string stationNameAcronym = 10; //  车站名拼音简写
  bool depots = 11; //是否车辆段
  repeated string oldmanageStations = 12; // 如果是集中站——管理的车站-id
  repeated uint32 manageStations = 13; // 如果是集中站——管理的车站-id
}

message TrainWindow {
  CommonInfo common = 1;
  string code = 2;
  int32 sectionId = 3;
}

message AxleCounting {
  enum TypeDetectionPoint {
    AxleCounting = 0;
    SectionBoundary = 1;
  }
  CommonInfo common = 1;
  string code = 2;                     // 名称
  KilometerSystem kilometerSystem = 3; //公里标
  repeated RelatedRef axleCountingRef = 4; // 计轴关联的非岔区物理区段和道岔，设备id和端口
  // int32 index = 5;             //计轴的索引编号
  //bool invent = 6;             //是否虚拟计轴--一般是最末端
  TypeDetectionPoint type = 7; //检测点的类型：计轴、区段边界
  repeated string oldcentralizedStations = 8; // 集中站Id列表
  repeated uint32 centralizedStations = 9; // 集中站Id列表
}

message GenerateAxleCountingConfig {
  repeated string oldbbConnect = 1; //需要在道岔bb连接处生成计轴的道岔id(填一个就行)
  repeated string oldnoGenerateGroup = 2;//指定的道岔组不生成计轴
  repeated uint32 bbConnect = 3; //需要在道岔bb连接处生成计轴的道岔id(填一个就行)
  repeated uint32 noGenerateGroup = 4;//指定的道岔组不生成计轴
}

// message Train {
//   CommonInfo common = 1;
//   string code = 2;
// }

// message IscsFan {
//   CommonInfo common = 1;
//   string code = 2;
// }

message Turnout { //(后端不关注)

  enum SwitchMachineType {
    Unknown = 0;
    ZDJ9_Single = 1;
    ZDJ9_Double = 2;
  }

  CommonInfo common = 1;
  string code = 2;
  repeated Point pointA = 6; // A端坐标列表
  repeated Point pointB = 7; // B端坐标列表
  repeated Point pointC = 8; // C端坐标列表
  RelatedRef paRef = 9;      // 道岔A端关联的设备
  RelatedRef pbRef = 10;     // 道岔B端关联的设备
  RelatedRef pcRef = 11;     // 道岔C端关联的设备
  // KilometerSystem kilometerSystem = 12; // 道岔公里标
  repeated KilometerSystem kilometerSystem = 13; // 道岔公里标
  // int32 index = 14;                              //索引
  string oldpaTrackSectionId = 15;                  // A端轨道区段id
  string oldpbTrackSectionId = 16;                  // B端轨道区段id
  string oldpcTrackSectionId = 17;                  // C端轨道区段id
  SwitchMachineType switchMachineType = 18;      // 转辙机类型
  repeated string oldcentralizedStations = 19; // 集中站Id列表
  repeated uint32 centralizedStations = 20; // 集中站Id列表
  uint32 paTrackSectionId = 21;                  // A端轨道区段id
  uint32 pbTrackSectionId = 22;                  // B端轨道区段id
  uint32 pcTrackSectionId = 23;                  // C端轨道区段id
}


message KilometerSystem {
  /** 左右行 **/
  enum Direction {
    LEFT = 0;
    RIGHT = 1;
  }
  int64 kilometer = 1;         //公里标mm
  string coordinateSystem = 2; //坐标系
  Direction direction = 3;     //左右行
}

message Signal {
  CommonInfo common = 1;
  string code = 2;
  bool mirror = 3;
  // int64 kilometer = 4;
  // string coordinateSystem = 5;
  KilometerSystem kilometerSystem = 6;
  // int32 index = 7;       //索引
  RelatedRef refDev = 8; //关联设备（区段/道岔）
  repeated string oldcentralizedStations = 9; // 集中站Id列表
  // 信号机模型类型枚举
  // 从左向右，最左边为靠近灯座的灯
  // 如果没有说明，默认不封灯，无引导
  // F-封 D-单 Y-有、带 Y-引导
  // H-红 L-绿 U-黄 A-蓝 B-白
  enum Model{
     HL = 0;          //2XH-1       红绿
     HLU_FU = 1;      //2XH-1       红绿黄,封黄灯，无引导
     HLU_DU_YY = 2;   //3XH-1       红绿黄,不封灯，有单黄，带引导
     HLU_YY = 3;      //3XH-2或JDXH 红绿黄,不封灯，无单黄，带引导
     HLU_FL_DU_YY = 4;//3XH-3       红绿黄,封绿灯，有单黄，带引导
     HLU_DU = 5;      //3XH-4       红绿黄,不封灯，有单黄，无引导
     AB = 6;          //DXCH        蓝白
     HBU_DU = 7;      //JCKXH       红白黄,不封灯，有单黄，无引导
  }
  // 信号机模型类型
  Model mt = 10;
  //string belongStation = 11; // 所属车站(缩写)
  Direction direction = 12; // 上下行
  repeated uint32 centralizedStations = 13; // 集中站Id列表
}

/** 上下行（区段/信号机） */
enum Direction {
  UP = 0;
  DOWN = 1;
}

/** 物理区段(包含岔区和非岔区) */
message Section {
  enum SectionType {
    Physical = 0;
    TurnoutPhysical = 2;
  }

  enum RunningDirection {
    AtoB = 0;
    BtoA = 1;
    BOTH = 2;
  }


  CommonInfo common = 1;
  string code = 2;           // 编号
  repeated Point points = 3; // 点列表
  RelatedRef paRef = 4; // 区段A端关联的设备(非岔区)(后端不关注)
  RelatedRef pbRef = 5; // 区段B端关联的设备(非岔区)(后端不关注)
  SectionType sectionType = 6;       // 区段类型
  repeated string oldaxleCountings = 7; // 区段对应的计轴
  // int32 index = 8;                   // 索引
  string oldtrackSectionId = 9;         // 下属轨道区段id
  bool isCurve = 10;                 // 是否曲线
  int32 segmentsCount = 12;          // 曲线分段数
  repeated string oldcentralizedStations = 13; // 集中站Id列表
  RunningDirection normalRunningDirection = 14; //常规运行方向
  bool isTurnBackZone = 15; // 是否为折返区域
  Direction direction = 16; // 上下行
  repeated uint32 axleCountings = 17; // 区段对应的计轴
  uint32 trackSectionId = 18;         // 下属轨道区段id
  repeated uint32 centralizedStations = 19; // 集中站Id列表
}

//关联设备
message RelatedRef {
  enum DeviceType {
    Section = 0;
    Turnout = 1;
    TrainWindow = 2;
    AxleCounting = 3;
    SectionLink = 4;
    signal = 5;
    station = 6;
    ScreenDoor = 7;
    SignalFaultAlarm = 8;
    Breakers = 9;//断路器
    PowerScreen = 10;//电源屏
  }

  enum DevicePort {
    A = 0;
    B = 1;
    C = 2;
  }

  DeviceType deviceType = 1; //关联的设备类型
  string oldid = 2;             //关联的设备ID
  DevicePort devicePort = 3; //关联的设备端口
  uint32 id = 4;
}

//计轴区段与道岔的位置关系
message TurnoutPosRef {
  string oldid = 1;      //道岔的ID
  int32 position = 2; //道岔的正反为，0是定位，1是反位
  uint32 id = 3;
}

message Separator { // 分隔符
  CommonInfo common = 1;
  string code = 2;
  string separatorType = 3;
}

message Transponder { // 应答器
  enum TransponderTypeEnum {
    FB = 0; // 固定应答器
    WB = 1; // 轮径校正应答器
    DB = 2; // 休眠唤醒应答器
    VB = 3; // 主信号应答器
    IB = 4; // 预告应答器
  }
  CommonInfo common = 1;
  string code = 2;
  // int32 transponderType = 3; // 作废
  // int32 index = 4;                     // 索引编号
  KilometerSystem kilometerSystem = 5; //公里标
  RelatedRef TransponderRef = 6;       //关联关系
  repeated string oldcentralizedStations = 7; // 集中站Id列表
  // bytes fixedTelegram = 8;//无源应答器固定报文
  TransponderTypeEnum type = 9;//应答器类型
  repeated uint32 centralizedStations = 10; // 集中站Id列表
  string fixedTelegram = 11; //应答器固定报文
  string fixedUserTelegram = 12; //应答器固定用户报文
}

message SimpleRef {
  enum DeviceType {
    Turnout = 0;
    AxleCounting = 1;
  }
  DeviceType deviceType = 1;
  string oldid = 2;
  uint32 id = 3;
}

message SectionLink {
  CommonInfo common = 1;
  string code = 2;
  repeated Point points = 3;
  bool up = 4; // 是否上行
  SimpleRef aSimRef =
      5; // SectionLink A端连接设备（构建关系 AxleCounting/Turnout）  //端点
  SimpleRef bSimRef =
      6; // SectionLink B端连接设备（构建关系 AxleCounting/Turnout）  //端点
  RelatedRef aRef =
      7; // SectionLink A端连接设备（端口关系 SectionLink/Turnout）
  RelatedRef bRef = 8; // SectionLink B端连接设备（端口关系
                       // SectionLink/Turnout）
  // int32 index = 9;     // 索引编号
}

message AxleCountingSection { // 计轴区段
  CommonInfo common = 1;
  string code = 2; // 名称
  repeated Point points = 3;
  RelatedRef paRef = 4;                  // 计轴区段A端关联的计轴
  RelatedRef pbRef = 5;                  // 计轴区段B端关联的计轴
  repeated TurnoutPosRef turnoutPos = 6; //关联道岔的正反位--0是定位，1是反位
  // int32 index = 7;                       //计轴区段的索引编号
}

message LogicSection { // 逻辑区段
  CommonInfo common = 1;
  string code = 2; // 名称
  repeated Point points = 3;
  string oldaxleSectionId = 4; // 关联的计轴区段Id
  // int32 index = 5;          // 索引编号
  string oldturnoutId = 6; // 关联的岔芯对应的道岔id，此时该逻辑区段为该道岔C端关联的轨道link
  uint32 axleSectionId = 7; // 关联的计轴区段Id
  uint32 turnoutId = 8; // 关联的岔芯对应的道岔id，此时该逻辑区段为该道岔C端关联的轨道link
}

message TrackSection { //轨道区段
  enum TrackSectionType {
    NORMAL = 0; //非岔区
    FORK = 1;   //岔区
  }
  CommonInfo common = 1;
  repeated Point points = 2;
  string code = 3;                       //名称
  // int32 index = 4;                       //索引
  TrackSectionType type = 5;             //类型
  string destinationCode = 6;            //目的地码
  repeated string oldtrackLogicSection = 7; //下属的逻辑区段id(非岔区)
  //   //关联的物理设备id(物理区段/道岔)由另一端(物理区段/道岔处理)
  bool isCurve = 8;        // 是否曲线
  int32 segmentsCount = 9; // 曲线分段数
  repeated uint32 trackLogicSection = 10; //下属的逻辑区段id(非岔区)
}

message TrackLogicSection { //轨道逻辑区段
  CommonInfo common = 1;
  repeated Point points = 2;
  string code = 3;  //名称
  int32 length = 4; //长度(mm)
}

message StopPosition {
  enum CoachNum {
    Four = 0;
    Six = 1;
    Eight = 2;
  }
  CommonInfo common = 1;
  string code = 2;
  bool flip = 3;         // 是否翻转（前端显示）
  CoachNum coachNum = 4; //编组数量
  // int32 index = 5;       //索引
  KilometerSystem kilometerSystem = 6;
  RelatedRef refDev = 7; // 关联设备（区段）
}

message SpksSwitch {
  CommonInfo common = 1;
  string code = 2;
  bool flip = 3;                   // 是否翻转（前端显示）
  // int32 index = 4;                 //索引
  // int32 refStand = 5;              //关联站台索引
  repeated string oldrefSections = 6; // 关联物理区段id
  string oldrefStand = 7; // 关联站台
  repeated uint32 refSections = 8; // 关联物理区段id
  uint32 refStand = 9; // 关联站台
}

message EsbButton {
  CommonInfo common = 1;
  string code = 2;
  bool flip = 3;      // 是否翻转（前端显示）
  // int32 index = 4;    //索引
  // int32 refStand = 5; // 关联站台索引
  string oldrefStand = 6; // 关联站台
  uint32 refStand = 7; // 关联站台
  //string refEsbButtonMapCode = 8; // 关联紧急关闭按钮地图Code--关联PSL地图
}

message GatedBox {
  CommonInfo common = 1;
  string code = 2;
  bool flip = 3;   // 是否翻转（前端显示）
  // int32 index = 4; //索引
  string oldrefScreenDoor = 5; // 关联屏蔽门
  string refGatedBoxMapCode = 6; // 关联门控箱地图Code
  uint32 refScreenDoor = 7; // 关联屏蔽门
}

message IbpBox {
  CommonInfo common = 1;
  string code = 2;
  string refIbpMapCode = 3; // 关联Ibp地图Code
  uint32 refStationId = 4; // 关联车站id
}

message PslBox {
  CommonInfo common = 1;
  string code = 2;
  string refPslMapCode = 3; // 关联Psl地图Code
  uint32 refPlatformId = 4; // 关联站台id
}

/** 坡度公里标 */
message SlopeKiloMarker {
  CommonInfo common = 1;
  string code = 2;
  repeated KilometerSystem kilometerSystem = 4; //公里标数据
}

/** 曲度公里标 */
message CurvatureKiloMarker {
  CommonInfo common = 1;
  string code = 2;
  repeated KilometerSystem kilometerSystem = 4; //公里标数据
}

/** 信标 */
message Beacon {
  enum BeaconType {
    Static = 0;
    Dynamic = 1;
  }
  CommonInfo common = 1;
  string code = 2;
  BeaconType type = 3;
  bool flip = 4;
}

message Slope {
  CommonInfo common = 1;
  repeated Point points = 2;
  sint32 slopeNumber = 3;          //坡度的值--正负代表上下坡
  repeated string oldrefDeviceId = 4; // 坡度关联的(坡度公里标)
  repeated uint32 refDeviceId = 5; // 坡度关联的(坡度公里标)
}

message Curvature {
  CommonInfo common = 1;
  repeated Point points = 2;
  sint32 curvatureNumber = 3; //曲线的半径--正代表外侧；负代表内侧
  repeated string oldrefDeviceId = 4; // 曲线关联的(曲度公里标)
  repeated uint32 refDeviceId = 5; // 曲线关联的(曲度公里标)
}

// 计算link结构
// message CalculateLink {
//   CommonInfo common = 1;
//   repeated Point points = 2;
//   int32 length = 3;           //长度，mm
//   RelatedRef aRelatedRef = 4; // A端（最小端）关联的端点 （道岔端点）
//   RelatedRef bRelatedRef = 5; // B端（最大端）关联的端点 （道岔端点）
//   repeated DevicePosition devicePositions = 6; //设备在link上的位置
//   int32 index = 7;                             // link唯一标识
//   message DevicePosition {
//     int32 offset = 1;
//     string deviceId = 2;
//     string deviceType = 3;
//   }
// }
/** 发车计时器 */
message DepartureTimer {
  CommonInfo common = 1;
  string code = 2;
  string oldrefStand = 3; // 关联站台
  string runDirection = 4; //运行方向
  uint32 refStand = 5; // 关联站台
}

message AutoReturnBox {
  CommonInfo common = 1;
  string code = 2;
  bool flip = 3;      // 是否翻转（前端显示）
  int32 index = 4;    //索引
  string oldrefStand = 5; // 关联站台
  uint32 refStand = 6; // 关联站台
}

message UniqueIdOfStationLayout {
  string city = 1;//城市
  string lineId = 2;//线路号
  string mainCoordinateSystem = 3;//地图的公里标主坐标系
}

//公里标转换
message KilometerConvert {
  KilometerSystem kmA = 1;
  KilometerSystem kmB = 2;
  bool sameTrend = 3; //相同趋势（同增同减）？
}

/* 车站关联的设备列表 */
message StationRelateDevice {
  string code = 1;//设备编号
  repeated DeviceCombinationtype combinationtypes = 2; //组合类型
  RelatedRef.DeviceType deviceType = 3;//设备类型
}
message DeviceCombinationtype {
  string code = 1;
  repeated string oldrefDevices = 2;//车站关联的设备
  repeated uint32 refDevices = 3;//车站关联的设备
}

message SectionCodePoint {
  string oldCentralizedStation = 1; // 集中站id
  repeated string oldsectionIds = 2; //物理区段id列表
  repeated uint32 sectionIds = 3; //物理区段id列表
  uint32 centralizedStation = 4; // 集中站id
}

// 列车信息
message Train {
  enum TrainModel { // 车型
    A = 0;
    B = 1;
    C = 2;
    D = 3;
  }
  TrainModel trainModel = 1; // 车型
  int32 carriageLength = 2; // 列车车厢长度
  int32 totalLength = 3; // 总长度
//  int32 minDiameter = 4; // 车轮的最小直径
//  int32 maxDiameter = 5; // 车轮的最大直径
  string trainSets = 6; // 编组
  common.TrainDynamicConfig dynamicConfig = 7; //动力学参数
}

// 其他线
message OtherLine {
  string name = 1;
  repeated string oldids = 2; // 设备id列表
  repeated uint32 ids = 3; // 设备id列表
}