diff --git a/protos/relayCabinetLayoutGraphics.proto b/protos/relayCabinetLayoutGraphics.proto index 355ce82..c79f59c 100644 --- a/protos/relayCabinetLayoutGraphics.proto +++ b/protos/relayCabinetLayoutGraphics.proto @@ -64,8 +64,8 @@ message DeviceRelateRelay { } message Combinationtype { string code = 1; - repeated string refRelays = 2;//设备关联的继电器 - repeated uint32 newrefRelays = 3;//设备关联的继电器 + repeated string oldrefRelays = 2;//设备关联的继电器 + repeated uint32 refRelays = 3;//设备关联的继电器 } message UniqueIdType { @@ -94,9 +94,9 @@ message CjDataItem { Q=0; H=1; } - string relayId = 1;//采集对应的继电器Id + string oldrelayId = 1;//采集对应的继电器Id PostionType position = 2;//继电器的位置，QH对应着吸合 - uint32 newrelayId = 3;//采集对应的继电器Id + uint32 relayId = 3;//采集对应的继电器Id } /* 驱动 */ @@ -111,6 +111,6 @@ message QdDataSet { } message QdData { - repeated string refRelays=1;//驱动的继电器Id - repeated uint32 newrefRelays=2;//驱动的继电器Id + repeated string oldrefRelays=1;//驱动的继电器Id + repeated uint32 refRelays=2;//驱动的继电器Id } diff --git a/protos/stationLayoutGraphics.proto b/protos/stationLayoutGraphics.proto index d5e19d0..42eb4d2 100644 --- a/protos/stationLayoutGraphics.proto +++ b/protos/stationLayoutGraphics.proto @@ -89,11 +89,11 @@ message ChildTransform { } // 公共属性 message CommonInfo { - string id = 1; + string oldid = 1; string graphicType = 2; Transform transform = 3; repeated ChildTransform childTransforms = 4; - uint32 newId = 5; + uint32 id = 5; } // message Link { @@ -131,12 +131,12 @@ message ConcentrationDividingLine { CommonInfo common = 1; string code = 2; // 编号 repeated Point points = 3; // 点列表 - string refLeftStationId = 4;//左边关联的集中站id - string refRightStationId = 5;//右边关联的集中站id + string oldrefLeftStationId = 4;//左边关联的集中站id + string oldrefRightStationId = 5;//右边关联的集中站id repeated NodeConWithSec nodeConWithSecs = 6;// 集中区分割线与区段的交点 bool isOtherLineConcentrationDividingLine = 7;//集中区分割线绘制在其它线的边界处 - uint32 newrefLeftStationId = 8;//左边关联的集中站id - uint32 newrefRightStationId = 9;//右边关联的集中站id + uint32 refLeftStationId = 8;//左边关联的集中站id + uint32 refRightStationId = 9;//右边关联的集中站id } message NodeConWithSec { @@ -158,21 +158,21 @@ message Platform { //int32 refStationIndex = 6; //关联车站索引 // repeated string centralizedStations = 7; // 集中站列表 //repeated RelatedRef platformRef = 8; //站台关联的车站和物理区段 - string refStationId = 9; //关联的车站的id - string refSectionId = 10; //关联的物理区段id + string oldrefStationId = 9; //关联的车站的id + string oldrefSectionId = 10; //关联的物理区段id string refEsbRelayCode = 11;//关联的紧急停车继电器的编号 TypeOfPlatform type = 12; //站台的上下行 - uint32 newrefStationId = 13; //关联的车站的id - uint32 newrefSectionId = 14; //关联的物理区段id + uint32 refStationId = 13; //关联的车站的id + uint32 refSectionId = 14; //关联的物理区段id } message ScreenDoor { CommonInfo common = 1; string code = 2; //int32 sonDoorAmount = 3; //子屏蔽门的数量 - string refPlatformId = 4; //关联的站台 + string oldrefPlatformId = 4; //关联的站台 //repeated ScreenDoorGroup screenDoorGroupList = 5;//编组列表 - uint32 newRefPlatformId = 6; //关联的站台 + uint32 refPlatformId = 6; //关联的站台 } message ScreenDoorConfig { @@ -198,8 +198,8 @@ message Station { string stationName = 9; //车站名 //string stationNameAcronym = 10; // 车站名缩写 bool depots = 11; //是否车辆段 - repeated string manageStations = 12; // 如果是集中站——管理的车站-id - repeated uint32 newmanageStations = 13; // 如果是集中站——管理的车站-id + repeated string oldmanageStations = 12; // 如果是集中站——管理的车站-id + repeated uint32 manageStations = 13; // 如果是集中站——管理的车站-id } message TrainWindow { @@ -220,15 +220,15 @@ message AxleCounting { // int32 index = 5; //计轴的索引编号 //bool invent = 6; //是否虚拟计轴--一般是最末端 TypeDetectionPoint type = 7; //检测点的类型：计轴、区段边界 - repeated string centralizedStations = 8; // 集中站Id列表 - repeated uint32 newcentralizedStations = 9; // 集中站Id列表 + repeated string oldcentralizedStations = 8; // 集中站Id列表 + repeated uint32 centralizedStations = 9; // 集中站Id列表 } message GenerateAxleCountingConfig { - repeated string bbConnect = 1; //需要在道岔bb连接处生成计轴的道岔id(填一个就行) - repeated string noGenerateGroup = 2;//指定的道岔组不生成计轴 - repeated uint32 newbbConnect = 3; //需要在道岔bb连接处生成计轴的道岔id(填一个就行) - repeated uint32 newnoGenerateGroup = 4;//指定的道岔组不生成计轴 + repeated string oldbbConnect = 1; //需要在道岔bb连接处生成计轴的道岔id(填一个就行) + repeated string oldnoGenerateGroup = 2;//指定的道岔组不生成计轴 + repeated uint32 bbConnect = 3; //需要在道岔bb连接处生成计轴的道岔id(填一个就行) + repeated uint32 noGenerateGroup = 4;//指定的道岔组不生成计轴 } // message Train { @@ -260,15 +260,15 @@ message Turnout { //(后端不关注) // KilometerSystem kilometerSystem = 12; // 道岔公里标 repeated KilometerSystem kilometerSystem = 13; // 道岔公里标 // int32 index = 14; //索引 - string paTrackSectionId = 15; // A端轨道区段id - string pbTrackSectionId = 16; // B端轨道区段id - string pcTrackSectionId = 17; // C端轨道区段id + string oldpaTrackSectionId = 15; // A端轨道区段id + string oldpbTrackSectionId = 16; // B端轨道区段id + string oldpcTrackSectionId = 17; // C端轨道区段id SwitchMachineType switchMachineType = 18; // 转辙机类型 - repeated string centralizedStations = 19; // 集中站Id列表 - repeated uint32 newcentralizedStations = 20; // 集中站Id列表 - uint32 newpaTrackSectionId = 21; // A端轨道区段id - uint32 newpbTrackSectionId = 22; // B端轨道区段id - uint32 newpcTrackSectionId = 23; // C端轨道区段id + repeated string oldcentralizedStations = 19; // 集中站Id列表 + repeated uint32 centralizedStations = 20; // 集中站Id列表 + uint32 paTrackSectionId = 21; // A端轨道区段id + uint32 pbTrackSectionId = 22; // B端轨道区段id + uint32 pcTrackSectionId = 23; // C端轨道区段id } @@ -292,7 +292,7 @@ message Signal { KilometerSystem kilometerSystem = 6; // int32 index = 7; //索引 RelatedRef refDev = 8; //关联设备（区段/道岔） - repeated string centralizedStations = 9; // 集中站Id列表 + repeated string oldcentralizedStations = 9; // 集中站Id列表 // 信号机模型类型枚举 // 从左向右，最左边为靠近灯座的灯 // 如果没有说明，默认不封灯，无引导 @@ -312,7 +312,7 @@ message Signal { Model mt = 10; //string belongStation = 11; // 所属车站(缩写) Direction direction = 12; // 上下行 - repeated uint32 newcentralizedStations = 13; // 集中站Id列表 + repeated uint32 centralizedStations = 13; // 集中站Id列表 } /** 上下行（区段/信号机） */ @@ -341,18 +341,18 @@ message Section { RelatedRef paRef = 4; // 区段A端关联的设备(非岔区)(后端不关注) RelatedRef pbRef = 5; // 区段B端关联的设备(非岔区)(后端不关注) SectionType sectionType = 6; // 区段类型 - repeated string axleCountings = 7; // 区段对应的计轴 + repeated string oldaxleCountings = 7; // 区段对应的计轴 // int32 index = 8; // 索引 - string trackSectionId = 9; // 下属轨道区段id + string oldtrackSectionId = 9; // 下属轨道区段id bool isCurve = 10; // 是否曲线 int32 segmentsCount = 12; // 曲线分段数 - repeated string centralizedStations = 13; // 集中站Id列表 + repeated string oldcentralizedStations = 13; // 集中站Id列表 RunningDirection normalRunningDirection = 14; //常规运行方向 bool isTurnBackZone = 15; // 是否为折返区域 Direction direction = 16; // 上下行 - repeated uint32 newaxleCountings = 17; // 区段对应的计轴 - uint32 newtrackSectionId = 18; // 下属轨道区段id - repeated uint32 newcentralizedStations = 19; // 集中站Id列表 + repeated uint32 axleCountings = 17; // 区段对应的计轴 + uint32 trackSectionId = 18; // 下属轨道区段id + repeated uint32 centralizedStations = 19; // 集中站Id列表 } //关联设备 @@ -378,9 +378,9 @@ message RelatedRef { } DeviceType deviceType = 1; //关联的设备类型 - string id = 2; //关联的设备ID + string oldid = 2; //关联的设备ID DevicePort devicePort = 3; //关联的设备端口 - uint32 newid = 4; + uint32 id = 4; } //计轴区段与道岔的位置关系 @@ -409,10 +409,10 @@ message Transponder { // 应答器 // int32 index = 4; // 索引编号 KilometerSystem kilometerSystem = 5; //公里标 RelatedRef TransponderRef = 6; //关联关系 - repeated string centralizedStations = 7; // 集中站Id列表 + repeated string oldcentralizedStations = 7; // 集中站Id列表 bytes fixedTelegram = 8;//无源应答器固定报文 TransponderTypeEnum type = 9;//应答器类型 - repeated uint32 newcentralizedStations = 10; // 集中站Id列表 + repeated uint32 centralizedStations = 10; // 集中站Id列表 } message SimpleRef { @@ -421,8 +421,8 @@ message SimpleRef { AxleCounting = 1; } DeviceType deviceType = 1; - string id = 2; - uint32 newid = 3; + string oldid = 2; + uint32 id = 3; } message SectionLink { @@ -455,11 +455,11 @@ message LogicSection { // 逻辑区段 CommonInfo common = 1; string code = 2; // 名称 repeated Point points = 3; - string axleSectionId = 4; // 关联的计轴区段Id + string oldaxleSectionId = 4; // 关联的计轴区段Id // int32 index = 5; // 索引编号 - string turnoutId = 6; // 关联的岔芯对应的道岔id，此时该逻辑区段为该道岔C端关联的轨道link - uint32 newaxleSectionId = 7; // 关联的计轴区段Id - uint32 newturnoutId = 8; // 关联的岔芯对应的道岔id，此时该逻辑区段为该道岔C端关联的轨道link + string oldturnoutId = 6; // 关联的岔芯对应的道岔id，此时该逻辑区段为该道岔C端关联的轨道link + uint32 axleSectionId = 7; // 关联的计轴区段Id + uint32 turnoutId = 8; // 关联的岔芯对应的道岔id，此时该逻辑区段为该道岔C端关联的轨道link } message TrackSection { //轨道区段 @@ -473,11 +473,11 @@ message TrackSection { //轨道区段 // int32 index = 4; //索引 TrackSectionType type = 5; //类型 string destinationCode = 6; //目的地码 - repeated string trackLogicSection = 7; //下属的逻辑区段id(非岔区) + repeated string oldtrackLogicSection = 7; //下属的逻辑区段id(非岔区) // //关联的物理设备id(物理区段/道岔)由另一端(物理区段/道岔处理) bool isCurve = 8; // 是否曲线 int32 segmentsCount = 9; // 曲线分段数 - repeated uint32 newtrackLogicSection = 10; //下属的逻辑区段id(非岔区) + repeated uint32 trackLogicSection = 10; //下属的逻辑区段id(非岔区) } message TrackLogicSection { //轨道逻辑区段 @@ -508,10 +508,10 @@ message SpksSwitch { bool flip = 3; // 是否翻转（前端显示） // int32 index = 4; //索引 // int32 refStand = 5; //关联站台索引 - repeated string refSections = 6; // 关联物理区段id - string refStand = 7; // 关联站台 - repeated uint32 newrefSections = 8; // 关联物理区段id - uint32 newrefStand = 9; // 关联站台 + repeated string oldrefSections = 6; // 关联物理区段id + string oldrefStand = 7; // 关联站台 + repeated uint32 refSections = 8; // 关联物理区段id + uint32 refStand = 9; // 关联站台 } message EsbButton { @@ -520,8 +520,8 @@ message EsbButton { bool flip = 3; // 是否翻转（前端显示） // int32 index = 4; //索引 // int32 refStand = 5; // 关联站台索引 - string refStand = 6; // 关联站台 - uint32 newrefStand = 7; // 关联站台 + string oldrefStand = 6; // 关联站台 + uint32 refStand = 7; // 关联站台 } message GatedBox { @@ -529,9 +529,9 @@ message GatedBox { string code = 2; bool flip = 3; // 是否翻转（前端显示） // int32 index = 4; //索引 - string refScreenDoor = 5; // 关联屏蔽门 + string oldrefScreenDoor = 5; // 关联屏蔽门 string refGatedBoxMapCode = 6; // 关联门控箱地图Code - uint32 newrefScreenDoor = 7; // 关联屏蔽门 + uint32 refScreenDoor = 7; // 关联屏蔽门 } /** 坡度公里标 */ @@ -564,16 +564,16 @@ message Slope { CommonInfo common = 1; repeated Point points = 2; sint32 slopeNumber = 3; //坡度的值--正负代表上下坡 - repeated string refDeviceId = 4; // 坡度关联的(坡度公里标) - repeated uint32 newrefDeviceId = 5; // 坡度关联的(坡度公里标) + repeated string oldrefDeviceId = 4; // 坡度关联的(坡度公里标) + repeated uint32 refDeviceId = 5; // 坡度关联的(坡度公里标) } message Curvature { CommonInfo common = 1; repeated Point points = 2; sint32 curvatureNumber = 3; //曲线的半径--正代表外侧；负代表内侧 - repeated string refDeviceId = 4; // 曲线关联的(曲度公里标) - repeated uint32 newrefDeviceId = 5; // 曲线关联的(曲度公里标) + repeated string oldrefDeviceId = 4; // 曲线关联的(曲度公里标) + repeated uint32 refDeviceId = 5; // 曲线关联的(曲度公里标) } // 计算link结构 @@ -595,9 +595,9 @@ message CalculateLink { message DepartureTimer { CommonInfo common = 1; string code = 2; - string refStand = 3; // 关联站台 + string oldrefStand = 3; // 关联站台 string runDirection = 4; //运行方向 - uint32 newrefStand = 5; // 关联站台 + uint32 refStand = 5; // 关联站台 } message AutoReturnBox { @@ -605,8 +605,8 @@ message AutoReturnBox { string code = 2; bool flip = 3; // 是否翻转（前端显示） int32 index = 4; //索引 - string refStand = 5; // 关联站台 - uint32 newrefStand = 6; // 关联站台 + string oldrefStand = 5; // 关联站台 + uint32 refStand = 6; // 关联站台 } message UniqueIdOfStationLayout { @@ -630,14 +630,14 @@ message StationRelateDevice { } message DeviceCombinationtype { string code = 1; - repeated string refDevices = 2;//车站关联的设备 - repeated int32 newrefDevices = 3;//车站关联的设备 + repeated string oldrefDevices = 2;//车站关联的设备 + repeated int32 refDevices = 3;//车站关联的设备 } message SectionCodePoint { string centralizedStation = 1; - repeated string sectionIds = 2; //物理区段id列表 - repeated uint32 newsectionIds = 3; //物理区段id列表 + repeated string oldsectionIds = 2; //物理区段id列表 + repeated uint32 sectionIds = 3; //物理区段id列表 } // 列车信息 @@ -659,6 +659,6 @@ message Train { // 其他线 message OtherLine { string name = 1; - repeated string ids = 2; // 设备id列表 - repeated uint32 newids = 3; // 设备id列表 + repeated string oldids = 2; // 设备id列表 + repeated uint32 ids = 3; // 设备id列表 }