rts-sim-testing-message/protos/stationLayoutGraphics.proto

377 lines
10 KiB
Protocol Buffer
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

syntax = "proto3";
package graphicData;
option java_package = "club.joylink.bjrtss.ats.verify.protos";
option java_outer_classname = "LayoutGraphicsProto";
option go_package = "./ats/verify/protos/graphicData";
message RtssGraphicStorage {
Canvas canvas = 1;
// repeated Link links = 2;
// repeated IscsFan iscsFans = 3;
repeated Platform Platforms = 4;
repeated Station stations = 5;
// repeated Rect rects = 6;
// repeated Train train = 7;
repeated Signal signals = 8;
repeated Turnout turnouts = 9;
repeated Section section = 10;
// repeated Polygon polygons = 11;
repeated TrainWindow trainWindows = 12;
repeated AxleCounting axleCountings = 13;
repeated Separator separators = 14;
repeated SectionLink sectionLinks = 15;
repeated AxleCountingSection axleCountingSections = 16;
repeated LogicSection logicSections = 17;
repeated StopPosition stopPositions = 18;
repeated SpksSwitch spksSwitchs = 19;
repeated EsbButton esbButtons = 20; // 紧急关闭按钮
repeated GatedBox gateBoxs = 21; // 站台开门/关门/发车按钮整合控制箱
repeated Transponder transponders = 22; // 应答器
repeated Slope slopes = 23; // 坡度
repeated CalculateLink CalculateLink = 24; // 计算link信息
repeated SlopeKiloMarker slopeKiloMarker = 25; //坡度公里标
repeated CurvatureKiloMarker curvatureKiloMarker = 26; //曲度公里标
repeated Curvature curvatures = 27; // 曲度
}
message Canvas {
// 画布宽
int32 width = 1;
// 画布高
int32 height = 2;
// 背景色
string backgroundColor = 3;
// 视口变换
Transform viewportTransform = 4;
}
message Point {
// x坐标
float x = 1;
// y坐标
float y = 2;
}
//变换
message Transform {
// 位移
Point position = 1;
// 缩放
Point scale = 2;
// 旋转弧度
float rotation = 3;
// 歪斜
Point skew = 4;
}
//子元素变换
message ChildTransform {
// 子元素名称
string name = 1;
// 子元素变换
Transform transform = 2;
}
// 公共属性
message CommonInfo {
string id = 1;
string graphicType = 2;
Transform transform = 3;
repeated ChildTransform childTransforms = 4;
}
// message Link {
// CommonInfo common = 1;
// string code = 2;
// bool curve = 3; // 是否曲线
// int32 segmentsCount = 4; // 曲线分段数
// int32 lineWidth = 5; // 线宽
// string lineColor = 6; // 线色
// repeated Point points = 7; // 点坐标列表
// }
// message Rect {
// CommonInfo common = 1;
// string code = 2;
// int32 lineWidth = 3; // 线宽
// string lineColor = 4; // 线色
// float width = 5; //宽度
// float height = 6; //高度
// int32 radius = 7; //圆角半径
// Point point = 8; // 画第一个点的坐标
// }
// message Polygon {
// CommonInfo common = 1;
// string code = 2;
// int32 lineWidth = 3; // 线宽
// string lineColor = 4; // 线色
// repeated Point points = 5; // 点坐标列表
// }
message Platform {
CommonInfo common = 1;
string code = 2;
bool hasdoor = 3; // 是否有屏蔽门
string direction = 4; // 行驶方向--屏蔽门上下
int32 index = 5; //索引
int32 refStationIndex = 6; //关联车站索引
}
message Station {
CommonInfo common = 1;
string code = 2;
// bool hasControl = 3; // 是否有控制
bool concentrationStations = 4; //是否集中站
// string kilometerCode = 5; //公里标
KilometerSystem kilometerSystem = 6; //公里标
int32 index = 7;
}
message TrainWindow {
CommonInfo common = 1;
string code = 2;
string sectionId = 3;
}
message AxleCounting {
CommonInfo common = 1;
string code = 2; // 名称
KilometerSystem kilometerSystem = 3; //公里标
repeated RelatedRef axleCountingRef =
4; // 计轴关联的非岔区物理区段和道岔设备id和端口
int32 index = 5; //计轴的索引编号
bool invent = 6; //是否虚拟计轴--一般是最末端
}
// message Train {
// CommonInfo common = 1;
// string code = 2;
// }
// message IscsFan {
// CommonInfo common = 1;
// string code = 2;
// }
message Turnout { //(后端不关注)
CommonInfo common = 1;
string code = 2;
repeated Point pointA = 6; // A端坐标列表
repeated Point pointB = 7; // B端坐标列表
repeated Point pointC = 8; // C端坐标列表
RelatedRef paRef = 9; // 道岔A端关联的设备
RelatedRef pbRef = 10; // 道岔B端关联的设备
RelatedRef pcRef = 11; // 道岔C端关联的设备
// KilometerSystem kilometerSystem = 12; // 道岔公里标
repeated KilometerSystem kilometerSystem = 13; // 道岔公里标
int32 index = 14; //索引
}
/** 左右行 **/
enum Direction {
LEFT = 0;
RIGHT = 1;
}
message KilometerSystem {
int64 kilometer = 1; //公里标mm
string coordinateSystem = 2; //坐标系
Direction direction = 3; //左右行
}
message Signal {
CommonInfo common = 1;
string code = 2;
bool mirror = 3;
// int64 kilometer = 4;
// string coordinateSystem = 5;
KilometerSystem kilometerSystem = 6;
int32 index = 7; //索引
RelatedRef refDev = 8; //关联设备(区段/道岔)
}
/** 物理区段(包含岔区和非岔区) */
message Section {
enum SectionType {
Physical = 0;
TurnoutPhysical = 2;
}
CommonInfo common = 1;
string code = 2; // 编号
repeated Point points = 3; // 点列表
RelatedRef paRef = 4; // 区段A端关联的设备(非岔区)(后端不关注)
RelatedRef pbRef = 5; // 区段B端关联的设备(非岔区)(后端不关注)
SectionType sectionType = 6; // 区段类型
repeated string axleCountings = 7; // 区段对应的计轴
int32 index = 8; // 索引
}
//关联设备
message RelatedRef {
enum DeviceType {
Section = 0;
Turnout = 1;
TrainWindow = 2;
AxleCounting = 3;
SectionLink = 4;
}
enum DevicePort {
A = 0;
B = 1;
C = 2;
}
DeviceType deviceType = 1; //关联的设备类型
string id = 2; //关联的设备ID
DevicePort devicePort = 3; //关联的设备端口
}
//计轴区段与道岔的位置关系
message TurnoutPosRef {
string id = 1; //道岔的ID
int32 position = 2; //道岔的正反为0是定位1是反位
}
message Separator { // 分隔符
CommonInfo common = 1;
string code = 2;
string separatorType = 3;
}
message Transponder { // 应答器
CommonInfo common = 1;
string code = 2;
int32 transponderType = 3;
int32 index = 4; // 索引编号
KilometerSystem kilometerSystem = 5; //公里标
RelatedRef TransponderRef = 6; //关联关系
}
message SimpleRef {
enum DeviceType {
Turnout = 0;
AxleCounting = 1;
}
DeviceType deviceType = 1;
string id = 2;
}
message SectionLink {
CommonInfo common = 1;
string code = 2;
repeated Point points = 3;
bool up = 4; // 是否上行
SimpleRef aSimRef = 5; // SectionLink A端连接设备构建关系 AxleCounting/Turnout //端点
SimpleRef bSimRef = 6; // SectionLink B端连接设备构建关系 AxleCounting/Turnout //端点
RelatedRef aRef = 7; // SectionLink A端连接设备端口关系 SectionLink/Turnout
RelatedRef bRef = 8; // SectionLink B端连接设备端口关系
// SectionLink/Turnout
int32 index = 9; // 索引编号
}
message AxleCountingSection { // 计轴区段
CommonInfo common = 1;
string code = 2; // 名称
repeated Point points = 3;
RelatedRef paRef = 4; // 计轴区段A端关联的计轴
RelatedRef pbRef = 5; // 计轴区段B端关联的计轴
repeated TurnoutPosRef turnoutPos = 6; //关联道岔的正反位--0是定位1是反位
int32 index = 7; //计轴区段的索引编号
}
message LogicSection { // 逻辑区段
CommonInfo common = 1;
string code = 2; // 名称
repeated Point points = 3;
string axleSectionId = 4; // 关联的计轴区段Id
int32 index = 5; // 索引编号
string turnoutId =
6; // 关联的岔芯对应的道岔id此时该逻辑区段为该道岔C端关联的轨道link
}
message StopPosition {
enum CoachNum {
Four = 0;
Six = 1;
}
CommonInfo common = 1;
string code = 2;
bool flip = 3; // 是否翻转(前端显示)
CoachNum coachNum = 4; //编组数量
int32 index = 5; //索引
KilometerSystem kilometerSystem = 6;
RelatedRef refDev = 7; // 关联设备(区段)
}
message SpksSwitch {
CommonInfo common = 1;
string code = 2;
bool flip = 3; // 是否翻转(前端显示)
int32 index = 4; //索引
int32 refStand = 5; //关联站台索引
repeated string refSections = 6; // 关联物理区段id
}
message EsbButton {
CommonInfo common = 1;
string code = 2;
bool flip = 3; // 是否翻转(前端显示)
int32 index = 4; //索引
int32 refStand = 5; // 关联站台索引
}
message GatedBox {
CommonInfo common = 1;
string code = 2;
bool flip = 3; // 是否翻转(前端显示)
int32 index = 4; //索引
}
/** 坡度公里标 */
message SlopeKiloMarker {
CommonInfo common = 1;
string code = 2;
repeated KilometerSystem kilometerSystem = 4; //公里标数据
}
/** 曲度公里标 */
message CurvatureKiloMarker {
CommonInfo common = 1;
string code = 2;
repeated KilometerSystem kilometerSystem = 4; //公里标数据
}
message Slope {
CommonInfo common = 1;
repeated Point points = 2;
sint32 slopeNumber = 3; //坡度的值--正负代表上下坡
repeated string refDeviceId = 4; // 坡度关联的(坡度公里标)
}
message Curvature {
CommonInfo common = 1;
repeated Point points = 2;
sint32 curvatureNumber = 3; //曲线的半径--正代表外侧;负代表内侧
repeated string refDeviceId = 4; // 曲线关联的(曲度公里标)
}
// 计算link结构
message CalculateLink {
CommonInfo common = 1;
repeated Point points = 2;
int32 length = 3; //长度mm
RelatedRef aRelatedRef = 4; // A端最小端关联的端点
RelatedRef bRelatedRef = 5; // B端最大端关联的端点
repeated DevicePosition devicePositions = 6; //设备在link上的位置
int32 index = 7; //link唯一标识
bool ab = 8; // 是否是从A->B, 道岔直连为false
message DevicePosition {
int32 offset = 1;
string deviceId = 2;
string deviceType = 3;
}
}