[新增]11号线联锁通信所属线路配置；11号线联锁通信原始数据及解析后的json数据日志

config/config.go

@@ -3,10 +3,9 @@ package config
 import (
 	"flag"
 	"fmt"
-	"log/slog"
-
 	"github.com/spf13/viper"
 	"joylink.club/iot/dto"
+	"log/slog"
 )
 
 const (
@@ -126,6 +125,7 @@ type InterlockConfig struct {
 	RemotePort int    `json:"remotePort" description:"远端接收采集信息端口"`
 	Open       bool   `json:"open" description:"是否开启"`
 	Code       string `json:"code" description:"所属集中站"`
+	Line       string `json:"line" description:"联锁通信协议所属线路"`
 }
 type ElectricMachineryConfig struct {
 	Ip         string `json:"ip" description:"IP配置"`

third_party/interlock/beijing11/beijing11_const.go

@@ -1,23 +0,0 @@
-package beijing11
-
-var (
-	FrameHead   byte = 0x0E //帧头
-	FrameTail   byte = 0x0E //帧尾
-	ControlWord      = controlWord{
-		HeartBeat:     0x00,
-		ReadRegister:  0x01,
-		WriteRegister: 0x02,
-		Response:      0x03,
-		Upstream:      0x06,
-		DownStream:    0x07,
-	}
-)
-
-type controlWord struct {
-	HeartBeat     byte //心跳
-	ReadRegister  byte //读寄存器
-	WriteRegister byte //写寄存器
-	Response      byte //回复
-	Upstream      byte //上行流数据
-	DownStream    byte //下行流数据
-}

third_party/interlock/beijing11/interlock.go

@@ -2,6 +2,7 @@
 package beijing11
 
 import (
+	"encoding/json"
 	"fmt"
 	"joylink.club/bj-rtsts-server/config"
 	"joylink.club/bj-rtsts-server/third_party/udp"
@@ -11,116 +12,52 @@ import (
 
 var (
 	initMutex = sync.Mutex{}
-	interlockMap = make(map[string]*InterlockProxy)
 	logTag    = "[北京11号线联锁通信]"
+	running   = false
+	server    udp.UdpServer
 )
 
-func GetInstant(c *config.InterlockConfig, msgManager MsgManager) *InterlockProxy {
-	initMutex.Lock()
-	defer initMutex.Unlock()
-	if interlockMap[c.Code] == nil {
-		interlockMap[c.Code] = &InterlockProxy{runConfig: c, msgManager: msgManager}
-	}
-	return interlockMap[c.Code]
-}
-
-type MsgManager interface {
-	HandleReadRegisterMsg(req *ReadRegisterReq) (*ReadRegisterRes, error)
-	HandleWriteRegisterMsg(req *WriteRegisterReq) error
-	HandleDownstreamMsg(data []byte) error
-	CollectUpstreamMsg() []byte
-}
-
-type msgManager struct {
-}
-
-type InterlockProxy struct {
-	runConfig  *config.InterlockConfig //联锁通信配置
-	msgManager MsgManager              //消息获取与处理接口0
-	client     udp.UdpClient           //向上位机发送数据的UDP客户端
-	server     udp.UdpServer           //接收上位机数据的UDP服务端
-	running    bool                    //此服务正在运行的标志
-}
-
-func (i *InterlockProxy) Start() {
-	if i.runConfig == nil || i.runConfig.Ip == "" || !i.runConfig.Open {
+func Start(interlockConfig *config.InterlockConfig) {
+	if interlockConfig == nil || interlockConfig.Ip == "" || !interlockConfig.Open {
 		return
 	}
-	if i.running {
-		panic("启动联锁消息服务错误: 存在正在运行的任务")
+	if running {
+		return
+	}
+	initMutex.Lock()
+	defer initMutex.Unlock()
+	if running {
+		return
 	}
 	//UDP通信设施
-	i.server = udp.NewServer(fmt.Sprintf(":%d", i.runConfig.LocalPort), i.handleUpperData)
-	err := i.server.Listen()
+	server = udp.NewServer(fmt.Sprintf(":%d", interlockConfig.LocalPort), func(b []byte) {
+		slog.Info(fmt.Sprintf("%s收到消息：%x", logTag, b))
+		frame := &FromInterlockFrame{}
+		err := frame.Decode(b)
 		if err != nil {
-		panic("启动联锁消息服务错误：无法启动UDP服务")
+			slog.Error(fmt.Sprintf("%s解析数据出错：%s", logTag, err))
+		} else {
+			marshal, err := json.Marshal(frame)
+			if err != nil {
+				slog.Error(fmt.Sprintf("%s解析为json出错：%s", logTag, err))
+			} else {
+				slog.Info(fmt.Sprintf("%s解析为json：%s", logTag, string(marshal)))
 			}
-	i.running = true
-	i.client = udp.NewClient(fmt.Sprintf("%v:%v", i.runConfig.Ip, i.runConfig.RemotePort))
+		}
+	})
+	err := server.Listen()
+	if err != nil {
+		panic(fmt.Sprintf("%s启动UDP服务失败：%s", logTag, err))
+	}
+	running = true
 }
 
-// 处理来自上位机的数据
-func (i *InterlockProxy) handleUpperData(data []byte) {
-	baseData := &BaseStruct{}
-	err := baseData.Decode(data)
-	if err != nil {
-		slog.Error(logTag + "数据解析出错：" + err.Error())
-		return
-	}
-	switch baseData.ControlWord {
-	case ControlWord.ReadRegister:
-		req := &ReadRegisterReq{}
-		err := req.Decode(baseData.Data)
-		if err != nil {
-			slog.Error(logTag + "读寄存器数据解析出错：" + err.Error())
-			return
-		}
-		res, err := i.msgManager.HandleReadRegisterMsg(req)
-		if err != nil {
-			slog.Error(logTag + "读寄存器数据处理出错：" + err.Error())
-			return
-		}
-		resData := &BaseStruct{
-			ID:          baseData.ID,
-			ControlWord: ControlWord.Response,
-			Data:        res.Encode(),
-		}
-		i.SendToUpper(resData.Encode())
-	case ControlWord.WriteRegister:
-		req := &WriteRegisterReq{}
-		err := req.Decode(baseData.Data)
-		if err != nil {
-			slog.Error(logTag + "写寄存器数据解析出错：" + err.Error())
-			return
-		}
-		err = i.msgManager.HandleWriteRegisterMsg(req)
-		if err != nil {
-			slog.Error(logTag + "写寄存器数据处理出错：" + err.Error())
-			return
-		}
-	case ControlWord.DownStream:
-		err = i.msgManager.HandleDownstreamMsg(baseData.Data)
-		if err != nil {
-			slog.Error(logTag + "下行数据处理出错：" + err.Error())
-			return
-		}
-	}
-}
-
-func (i *InterlockProxy) SendToUpper(data []byte) {
-	err := i.client.Send(data)
-	slog.Error(logTag + "向上位机发送数据失败：" + err.Error())
-}
-
-func (i *InterlockProxy) Stop() {
+func Stop() {
 	initMutex.Lock()
 	defer initMutex.Unlock()
-	delete(interlockMap, i.runConfig.Code)
-	if i.client != nil {
-		i.client.Close()
+	running = false
+	if server != nil {
+		server.Close()
+		server = nil
 	}
-	if i.server != nil {
-		i.server.Close()
-	}
-	i.running = false
 }

third_party/interlock/beijing11/msg.go

@@ -3,84 +3,337 @@ package beijing11
 import (
 	"encoding/binary"
 	"fmt"
-	"hash/crc32"
 	"joylink.club/bj-rtsts-server/sys_error"
 )
 
-type BaseStruct struct {
-	ID          byte
-	ControlWord byte
-	Data        []byte
+// FromInterlockFrame 来自联锁的数据帧
+type FromInterlockFrame struct {
+	Len             uint16
+	InterlockCode   uint16         //联锁ID
+	WaysideCode     uint16         //轨旁ID
+	TurnoutData     *DeviceData    //道岔数据
+	PSDData         *DeviceData    //屏蔽门数据
+	ESBData         *ESBData       //紧急停车按钮数据
+	HoldTrainData   *HoldTrainData //扣车按钮数据
+	SignalData      *DeviceData    //信号机数据
+	AxleSectionData *DeviceData    //计轴区段数据
+	WrzfData        *DeviceData    //无人折返数据
+	FymData         *DeviceData    //防淹门数据
+	SPKSData        *SPKSData      //SPKS数据
+	CkmData         *DeviceData    //车库门数据
+	XcjData         *DeviceData    //洗车机数据
 }
 
-func (m *BaseStruct) Decode(buf []byte) error {
-	if buf[0] != FrameHead {
-		return sys_error.New(logTag + "帧头不正确：" + fmt.Sprintf("%02X", buf[0]))
+func (f *FromInterlockFrame) Decode(data []byte) error {
+	f.Len = binary.BigEndian.Uint16(data[1:3])
+	if int(f.Len) != len(data)-3 {
+		return sys_error.New(fmt.Sprintf("%s数据长度不对[%d:%d]", logTag, f.Len, len(data)-3))
 	}
-	if buf[len(buf)-1] != FrameTail {
-		return sys_error.New(logTag + "帧尾不正确：" + fmt.Sprintf("%02X", buf[len(buf)-1]))
-	}
-	crc := crc32.ChecksumIEEE(buf[1 : len(buf)-5])
-	if crc != binary.BigEndian.Uint32(buf[len(buf)-5:len(buf)-1]) {
-		return sys_error.New(logTag + "CRC校验失败")
-	}
-	m.ID = buf[1]
-	m.ControlWord = buf[2]
-	m.Data = buf[5 : len(buf)-5]
+	f.InterlockCode = binary.BigEndian.Uint16(data[3:5])
+	f.WaysideCode = binary.BigEndian.Uint16(data[5:7])
+
+	turnoutData, i := decodeDeviceData(data, 7)
+	f.TurnoutData = turnoutData
+	psdData, i := decodeDeviceData(data, i)
+	f.PSDData = psdData
+	esbData, i := decodeESBData(data, i)
+	f.ESBData = esbData
+	holdTrainData, i := decodeHoldTrainData(data, i)
+	f.HoldTrainData = holdTrainData
+	signalData, i := decodeDeviceData(data, i)
+	f.SignalData = signalData
+	axleSectionData, i := decodeDeviceData(data, i)
+	f.AxleSectionData = axleSectionData
+	wrzfData, i := decodeDeviceData(data, i)
+	f.WrzfData = wrzfData
+	fymData, i := decodeDeviceData(data, i)
+	f.FymData = fymData
+	spksData, i := decodeSPKSData(data, i)
+	f.SPKSData = spksData
+	ckmData, i := decodeDeviceData(data, i)
+	f.CkmData = ckmData
+	xcjData, i := decodeDeviceData(data, i)
+	f.XcjData = xcjData
 	return nil
 }
 
-func (m *BaseStruct) Encode() []byte {
-	var data []byte
-	data = append(data, FrameHead)
-	data = append(data, m.ID)
-	data = append(data, m.ControlWord)
-	data = binary.BigEndian.AppendUint16(data, uint16(len(m.Data)))
-	data = append(data, m.Data...)
-	crc := crc32.ChecksumIEEE(data[1:])
-	data = binary.BigEndian.AppendUint32(data, crc)
-	data = append(data, FrameTail)
-	return data
+func decodeDeviceData(data []byte, index uint16) (*DeviceData, uint16) {
+	data = data[index:]
+	num := binary.BigEndian.Uint16(data[0:2])
+	i := 2 + 3*num
+	data = data[2:i]
+	var cmdList []*DeviceCmd
+	for i := 0; i < len(data); i += 3 {
+		cmdList = append(cmdList, &DeviceCmd{
+			Id:  binary.BigEndian.Uint16(data[i : i+2]),
+			Cmd: data[i+2],
+		})
+	}
+	deviceData := &DeviceData{
+		Num:     num,
+		CmdList: cmdList,
+	}
+	return deviceData, index + i
 }
 
-type ReadRegisterReq struct {
-	RegisterAddr []uint16 //寄存器地址
+func decodeESBData(data []byte, index uint16) (*ESBData, uint16) {
+	data = data[index:]
+	num := binary.BigEndian.Uint16(data[0:2])
+	nextIndex := 2 + 6*num
+	data = data[2:nextIndex]
+	var cmdList []*ESBCmd
+	for i := 0; i < len(data); i += 6 {
+		cmdList = append(cmdList, &ESBCmd{
+			Id:         binary.BigEndian.Uint16(data[i : i+2]),
+			JjtcCmd:    data[i+2],
+			JjtcplCmd:  data[i+3],
+			JjtcfmqCmd: data[i+4],
+			Ess1Cmd:    data[i+5],
+		})
+	}
+	deviceData := &ESBData{
+		Num:     num,
+		CmdList: cmdList,
+	}
+	return deviceData, index + nextIndex
 }
 
-func (r *ReadRegisterReq) Decode(buf []byte) error {
-	if len(buf)%2 != 0 {
-		return sys_error.New(logTag + "读寄存器数据字节长度不是2的倍数")
+func decodeHoldTrainData(data []byte, index uint16) (*HoldTrainData, uint16) {
+	data = data[index:]
+	num := binary.BigEndian.Uint16(data[0:2])
+	nextIndex := 2 + 6*num
+	data = data[2:nextIndex]
+	var cmdList []*HoldTrainCmd
+	for i := 0; i < len(data); i += 6 {
+		cmdList = append(cmdList, &HoldTrainCmd{
+			Id:       binary.BigEndian.Uint16(data[i : i+2]),
+			KcCmd:    data[i+2],
+			KcplCmd:  data[i+3],
+			Kc2Cmd:   data[i+4],
+			Kcpl2Cmd: data[i+5],
+		})
 	}
-	for i := 0; i < len(buf); i += 2 {
-		r.RegisterAddr = append(r.RegisterAddr, binary.BigEndian.Uint16(buf[i:i+2]))
+	deviceData := &HoldTrainData{
+		Num:     num,
+		CmdList: cmdList,
 	}
-	return nil
+	return deviceData, index + nextIndex
 }
 
-type ReadRegisterRes struct {
-	RegisterData [][]byte //寄存器数据
+func decodeSPKSData(data []byte, index uint16) (*SPKSData, uint16) {
+	data = data[index:]
+	num := binary.BigEndian.Uint16(data[0:2])
+	nextIndex := 2 + 4*num
+	data = data[2:nextIndex]
+	var cmdList []*SPKSCmd
+	for i := 0; i < len(data); i += 4 {
+		cmdList = append(cmdList, &SPKSCmd{
+			Id:        binary.BigEndian.Uint16(data[i : i+2]),
+			SPKSCmd:   data[i+2],
+			SPKSPLCmd: data[i+3],
+		})
+	}
+	deviceData := &SPKSData{
+		Num:     num,
+		CmdList: cmdList,
+	}
+	return deviceData, index + nextIndex
 }
 
-func (r *ReadRegisterRes) Encode() []byte {
-	var data []byte
-	for _, datum := range r.RegisterData {
-		data = append(data, datum...)
-	}
-	return data
+type DeviceData struct {
+	Num     uint16 //设备数量
+	CmdList []*DeviceCmd
 }
 
-type WriteRegisterReq struct {
-	RegisterAddr []uint16 //寄存器地址
-	RegisterData [][]byte //寄存器数据
+type ESBData struct {
+	Num     uint16 //紧急停车按钮的数量
+	CmdList []*ESBCmd
 }
 
-func (w *WriteRegisterReq) Decode(buf []byte) error {
-	if len(buf)%6 != 0 {
-		return sys_error.New(logTag + "写寄存器数据字节长度不是6的倍数")
+type HoldTrainData struct {
+	Num     uint16 //扣车的数量
+	CmdList []*HoldTrainCmd
 }
-	for i := 0; i < len(buf); i += 6 {
-		w.RegisterAddr = append(w.RegisterAddr, binary.BigEndian.Uint16(buf[i:i+2]))
-		w.RegisterData = append(w.RegisterData, buf[i+2:i+6])
+
+type SPKSData struct {
+	Num     uint16 //SPKS的数量
+	CmdList []*SPKSCmd
 }
-	return nil
+
+type ESBCmd struct {
+	Id         uint16 //紧急停车ID
+	JjtcCmd    byte   //紧急停车按钮命令
+	JjtcplCmd  byte   //紧急停车旁路按钮命令
+	JjtcfmqCmd byte   //紧急停车蜂鸣器命令
+	Ess1Cmd    byte   //Ess1指示灯状态
+}
+
+type HoldTrainCmd struct {
+	Id       uint16 //扣车ID
+	KcCmd    byte   //扣车命令
+	KcplCmd  byte   //扣车旁路命令
+	Kc2Cmd   byte   //2号扣车命令
+	Kcpl2Cmd byte   //2号扣车旁路命令
+}
+
+type SPKSCmd struct {
+	Id        uint16 //SPKS ID
+	SPKSCmd   byte   //SPKS按钮
+	SPKSPLCmd byte   //SPKSPL按钮
+}
+
+type DeviceCmd struct {
+	Id  uint16 //设备ID
+	Cmd byte   //设备命令
+}
+
+// ToInterlockFrame 发往联锁的数据帧
+type ToInterlockFrame struct {
+	Len             uint16
+	WaysideCode     uint16
+	InterlockCode   uint16
+	TurnoutData     *ToInterlockTurnoutData     //道岔数据
+	PSDData         *ToInterlockPSDData         //屏蔽门数据
+	ESBData         *ToInterlockESBData         //紧急停车按钮数据
+	HoldTrainData   *ToInterlockHoldTrainData   //扣车按钮数据
+	SignalData      *ToInterlockSignalData      //信号机数据
+	AxleSectionData *ToInterlockAxleSectionData //计轴区段数据
+	WrzfData        *ToInterlockWrzfData        //无人折返数据
+	FymData         *ToInterlockFymData         //防淹门数据
+	SPKSData        *ToInterlockSPKSData        //SPKS数据
+	CkmData         *ToInterlockCkmData         //车库门数据
+	XcjData         *ToInterlockXcjData         //洗车机数据
+}
+
+type ToInterlockTurnoutData struct {
+	Num       uint16 //该联锁集中区包含的道岔数量
+	StateList []*TurnoutState
+}
+
+type ToInterlockPSDData struct {
+	Num       uint16 //该联锁集中区包含的屏蔽门数量
+	StateList []*PSDState
+}
+
+type ToInterlockESBData struct {
+	Num       uint16 //紧急停车按钮数量
+	StateList []*ESBState
+}
+
+type ToInterlockHoldTrainData struct {
+	Num       uint16 //扣车数量
+	StateList []*HoldTrainState
+}
+
+type ToInterlockSignalData struct {
+	Num       uint16 //该联锁集中区信号机的数量
+	StateList []*SignalState
+}
+
+type ToInterlockAxleSectionData struct {
+	Num       uint16 //该联锁集中区计轴区段的数量
+	StateList []*AxleSectionState
+}
+
+type ToInterlockWrzfData struct {
+	Num       uint16 //该联锁集中区无人折返的数量
+	StateList []*WrzfState
+}
+
+type ToInterlockFymData struct {
+	Num       uint16 //该联锁集中区防<E58CBA><E998B2>门的数量
+	StateList []*FymState
+}
+
+type ToInterlockSPKSData struct {
+	Num       uint16 //SPKS数量
+	StateList []*SPKSState
+}
+
+type ToInterlockCkmData struct {
+	Num       uint16 //车库门数量
+	StateList []*CkmState
+}
+
+type ToInterlockXcjData struct {
+	Num       uint16 //洗车机数量
+	StateList []*XcjState
+}
+
+type TurnoutState struct {
+	Id       uint16 //道岔ID
+	State    byte   //道岔的采集状态
+	Alarm    byte   //道岔的报警状态
+	Current1 byte   //转辙机1电流值，单位A
+	Current2 byte   //转辙机2电流值，单位A
+}
+
+type PSDState struct {
+	Id    uint16 //屏蔽门ID
+	State byte   //屏蔽门开关门状态
+	Hsjc  byte   //互锁解除状态
+	PCB   byte   //PCB状态
+	POB   byte   //POB状态
+	DPB   byte   //DPB状态
+}
+
+type ESBState struct {
+	Id      uint16 //紧急停车ID
+	State   byte   //紧急停车按钮状态
+	PlState byte   //紧急停车按钮旁路状态
+	ESS     byte   //ESS状态（按下55，抬起aa）
+}
+
+type HoldTrainState struct {
+	Id       uint16 //扣车ID
+	State    byte   //扣车按钮状态（按下55，抬起aa）
+	PlState  byte   //扣车按钮旁路状态（按下55，抬起aa）
+	State2   byte   //2号扣车按钮状态（55开启，aa关闭）
+	PlState2 byte   //2号扣车按钮旁路状态（55开启，aa关闭）
+}
+
+type SignalState struct {
+	Id      uint16 //信号机ID
+	State   byte   //信号机的采集状态
+	Current byte   //信号机当前亮灯的电流值
+}
+
+type AxleSectionState struct {
+	Id    uint16 //计轴区段Id
+	State byte   //计轴区段的采集状态
+}
+
+type WrzfState struct {
+	Id    uint16 //无人折返ID
+	State byte   //无人折返的采集状态
+}
+
+type FymState struct {
+	Id          uint16 //防淹门ID
+	OpenAndLock byte   //防淹门打开锁闭状态
+	CloseReq    byte   //防淹门关闭请求状态
+}
+
+type SPKSState struct {
+	Id      uint16 //SPKS ID
+	State   byte   //SPKS按钮状态
+	PlState byte   //SPKSPL按钮状态
+}
+
+type CkmState struct {
+	Id         uint16 //车库门ID
+	State      byte   //车库门采集状态
+	ModeState  byte   //车库门模式状态
+	FaultState byte   //车库门故障状态
+}
+
+type XcjState struct {
+	Id              uint16 //洗车机ID
+	Ready           byte   //洗车机就绪状态
+	ResponseConfirm byte   //回复确认状态
+	GoState1        byte   //出发状态1
+	GoState2        byte   //出发状态2
+	StopState       byte   //急停状态
+	BackConfirm     byte   //返回确认状态
+	BackMode        byte   //模式
 }

third_party/interlock/beijing11/msg_test.go

@@ -0,0 +1,60 @@
+package beijing11
+
+import (
+	"encoding/binary"
+	"encoding/json"
+	"fmt"
+	"testing"
+)
+
+func TestFromInterlockFrame_Decode(t *testing.T) {
+	var interlockCode uint16 = 10010
+	var waysideCode uint16 = 10086
+	var data []byte
+	data = append(data, 0x82)
+	data = append(data, 0, 0) //报文长度（占位）
+	data = binary.BigEndian.AppendUint16(data, interlockCode)
+	data = binary.BigEndian.AppendUint16(data, waysideCode)
+	//填充设备数据
+	deviceCmdCount := []int{1, 1, 4, 4, 1, 1, 1, 1, 2, 1, 1}
+	for i, count := range deviceCmdCount {
+		data = binary.BigEndian.AppendUint16(data, uint16(i)) //设备数量
+		for j := 0; j < i; j++ {
+			data = binary.BigEndian.AppendUint16(data, uint16(j)) //设备ID
+			for k := 0; k < count; k++ {
+				data = append(data, byte(k)) //设备命令
+			}
+		}
+	}
+	//替换长度
+	len := uint16(len(data) - 3)
+	data[1] = byte(len >> 8)
+	data[2] = byte(len)
+
+	f := &FromInterlockFrame{}
+	err := f.Decode(data)
+	if err != nil {
+		t.Error(err)
+		t.FailNow()
+	}
+	marshal, _ := json.Marshal(f)
+	fmt.Println(marshal)
+	//if f.InterlockCode != interlockCode {
+	//	t.Error()
+	//}
+	//if f.WaysideCode != waysideCode {
+	//	t.Error()
+	//}
+	//elem := reflect.ValueOf(f).Elem()
+	//for i, count := range deviceCmdCount {
+	//	field := elem.Field(3 + i)
+	//	num := field.FieldByName("Num").Uint()
+	//	if int(num) != count {
+	//		t.Error()
+	//	}
+	//}
+}
+
+func TestName(t *testing.T) {
+
+}

ts/simulation/wayside/memory/wayside_simulation.go

@@ -444,6 +444,7 @@ func (s *VerifySimulation) GetInterlockCodes() []*config.InterlockConfig {
 			LocalPort:  c.LocalPort,
 			RemotePort: c.RemotePort,
 			Open:       c.Open,
+			Line:       c.Line,
 		})
 	}
 	return configs

ts/test_simulation_manage.go

@@ -4,6 +4,7 @@ import (
 	"fmt"
 	"joylink.club/bj-rtsts-server/third_party/acc"
 	"joylink.club/bj-rtsts-server/third_party/btm_vobc"
+	"joylink.club/bj-rtsts-server/third_party/interlock/beijing11"
 	"joylink.club/bj-rtsts-server/third_party/interlock/beijing12"
 	"joylink.club/bj-rtsts-server/third_party/radar"
 	"joylink.club/bj-rtsts-server/third_party/train_pc_sim"
@@ -121,8 +122,13 @@ func runThirdParty(s *memory.VerifySimulation) error {
 	semi_physical_train.Default().Start(s)
 	// 联锁启动
 	for _, c := range s.GetInterlockCodes() {
+		switch c.Line {
+		case "11":
+			beijing11.Start(c)
+		default:
 			beijing12.Default(c).Start(s)
 		}
+	}
 	// 计轴RSSP启动
 	axle_device.StartLineAllRsspAxleServices(s)
 	// 电机UDP启动
@@ -152,8 +158,13 @@ func stopThirdParty(s *memory.VerifySimulation) {
 	semi_physical_train.Default().Stop()
 	// 联锁启动
 	for _, c := range s.GetInterlockCodes() {
+		switch c.Line {
+		case "11":
+			beijing11.Stop()
+		default:
 			beijing12.Default(c).Stop()
 		}
+	}
 	//计轴RSSP启动销毁
 	axle_device.StopLineAllRsspAxleServices()
 	// 电机UDP停止