package message

// BtmStatusRspFrame BTM发往ATP的状态应答帧
type BtmStatusRspFrame struct {
	//帧ID
	FId CanFrameId
	//数据流水号，0～255变化，每次加一
	Dsn byte
	//应答器计数（每过一个应答器加一，在同一个应答器内不变）
	BaliseCounter byte
	//报文计数器（每解出一个报文加一）
	MessageCounter byte
	//功率放大器状态，true-1 turn on ;false-0 turn off
	PowerAmplifierOn bool
	//ATP查询帧CRC16校验结果,true-1校验失败，false-0校验通过
	AtpReqCrcCheckWrong bool
	//功率放大器故障,true-1故障，false-0正常
	PowerAmplifierFailure bool
	//天线故障,true-1故障，false-0正常
	AntennaFault bool
	//BTM detailed code
	DetailedCode byte
	//有具体报文内容时TK A时刻填充为CD信号上升沿时刻，报文全零时TK A时刻填充为CD信号下降沿时刻。
	TkTimeA uint32
}

func NewBtmStatusRspFrame(sn byte) *BtmStatusRspFrame {
	return &BtmStatusRspFrame{
		FId: *NewCanFrameId(CAN_ADDR_RSP_ATP, CAN_ADDR_RSP_BTM, CAN_FRAME_STATUS_RSP, sn),
	}
}
func (f *BtmStatusRspFrame) Decode(reader CanBitsReader) bool {
	if !f.FId.Decode(reader) {
		return false
	}
	//数据流水号
	if d, ok := reader.ReadByte(); ok {
		f.Dsn = d
	} else {
		return false
	}
	//应答器计数
	if d, ok := reader.ReadByte(); ok {
		f.BaliseCounter = d
	} else {
		return false
	}
	//报文计数器
	if d, ok := reader.ReadByte(); ok {
		f.MessageCounter = d
	} else {
		return false
	}
	//功率放大器状态
	if d, ok := reader.ReadBits(1); ok {
		f.PowerAmplifierOn = 1 == d
	} else {
		return false
	}
	//ATP查询帧CRC16校验结果
	if d, ok := reader.ReadBits(1); ok {
		f.AtpReqCrcCheckWrong = 1 == d
	} else {
		return false
	}
	//功率放大器故障
	if d, ok := reader.ReadBits(1); ok {
		f.PowerAmplifierFailure = 1 == d
	} else {
		return false
	}
	//天线故障
	if d, ok := reader.ReadBits(1); ok {
		f.AntennaFault = 1 == d
	} else {
		return false
	}
	//BTM detailed code
	if d, ok := reader.ReadBits(4); ok {
		f.DetailedCode = d
	} else {
		return false
	}
	//tk time a
	tk1, tk1Ok := reader.ReadByte()
	if !tk1Ok {
		return false
	}
	tk2, tk2Ok := reader.ReadByte()
	if !tk2Ok {
		return false
	}
	tk3, tk3Ok := reader.ReadByte()
	if !tk3Ok {
		return false
	}
	tk4, tk4Ok := reader.ReadByte()
	if !tk4Ok {
		return false
	}
	f.TkTimeA = 0
	f.TkTimeA |= uint32(tk1) << 24
	f.TkTimeA |= uint32(tk2) << 16
	f.TkTimeA |= uint32(tk3) << 8
	f.TkTimeA |= uint32(tk4)
	//
	return true
}
func (f *BtmStatusRspFrame) Encode() CanBusData {
	writer := NewCanBitsWriter(12)
	//
	f.FId.Encode(writer)
	writer.AddByte(f.Dsn)
	writer.AddByte(f.BaliseCounter)
	writer.AddByte(f.MessageCounter)
	//
	if f.PowerAmplifierOn {
		writer.AddBits(1, 1)
	} else {
		writer.AddBits(0, 1)
	}
	//
	if f.AtpReqCrcCheckWrong {
		writer.AddBits(1, 1)
	} else {
		writer.AddBits(0, 1)
	}
	//
	if f.PowerAmplifierFailure {
		writer.AddBits(1, 1)
	} else {
		writer.AddBits(0, 1)
	}
	//
	if f.AntennaFault {
		writer.AddBits(1, 1)
	} else {
		writer.AddBits(0, 1)
	}
	//
	writer.AddBits(f.DetailedCode, 4)
	//tk time a
	tkMsk := uint32(0x00_00_00_ff)
	tk1 := byte((f.TkTimeA >> 24) & tkMsk)
	tk2 := byte((f.TkTimeA >> 16) & tkMsk)
	tk3 := byte((f.TkTimeA >> 8) & tkMsk)
	tk4 := byte(f.TkTimeA & tkMsk)
	writer.AddByte(tk1)
	writer.AddByte(tk2)
	writer.AddByte(tk3)
	writer.AddByte(tk4)
	//
	return writer.(CanBusData)
}